I got with message today :
Oct 7 17:31:51 yamacraw kernel: Uhhuh. NMI received. Dazed and confused,
but trying to continue
Oct 7 17:31:51 yamacraw kernel: You probably have a hardware problem with
your RAM chips
with after the following :
Oct 7 17:33:47 yamacraw kernel: scsi : aborting command due to timeout :
pid 1008736, scsi3, channel 0, id 0, lun 0 Write (10) 00 04 7c b4 07 00 00
80 00
Oct 7 17:33:47 yamacraw kernel: scsi : aborting command due to timeout :
pid 1008737, scsi3, channel 0, id 0, lun 0 Write (10) 00 04 7c b4 87 00 00
80 00
Oct 7 17:33:47 yamacraw kernel: scsi : aborting command due to timeout :
pid 1008738, scsi3, channel 0, id 0, lun 0 Write (10) 00 04 7c b5 07 00 00
80 00
Oct 7 17:33:47 yamacraw kernel: scsi : aborting command due to timeout :
pid 1008739, scsi3, channel 0, id 0, lun 0 Write (10) 00 04 7c b5 87 00 00
80 00
Oct 7 17:33:47 yamacraw kernel: scsi : aborting command due to timeout :
pid 1008740, scsi3, channel 0, id 0, lun 0 Write (10) 00 04 7c b6 07 00 00
80 00
Oct 7 17:33:47 yamacraw kernel: scsi : aborting command due to timeout :
pid 1008741, scsi3, channel 0, id 0, lun 0 Write (10) 00 04 7c b6 87 00 00
80 00
Oct 7 17:33:47 yamacraw kernel: scsi : aborting command due to timeout :
pid 1008742, scsi3, channel 0, id 0, lun 0 Write (10) 00 04 7c b7 07 00 00
80 00
Oct 7 17:33:47 yamacraw kernel: scsi : aborting command due to timeout :
pid 1008743, scsi3, channel 0, id 0, lun 0 Write (10) 00 04 7c b7 87 00 00
68 00
Oct 7 17:33:47 yamacraw kernel: scsi : aborting command due to timeout :
pid 1008744, scsi3, channel 0, id 0, lun 0 Read (10) 00 00 47 50 93 00 00
08 00
Oct 7 17:33:47 yamacraw kernel: svc: unknown version (3)
Oct 7 17:33:47 yamacraw kernel: svc: unknown version (3)
Oct 7 17:33:48 yamacraw kernel: SCSI host 3 abort (pid 1008736) timed out
- - resetting
Oct 7 17:33:48 yamacraw kernel: SCSI bus is being reset for host 3 channel 0.
Oct 7 17:33:48 yamacraw kernel: SCSI host 3 channel 0 reset (pid 1008736)
timed out - trying harder
Oct 7 17:33:48 yamacraw kernel: SCSI bus is being reset for host 3 channel 0.
Oct 7 17:33:48 yamacraw kernel: SCSI host 3 abort (pid 1008737) timed out
- - resetting
Oct 7 17:33:48 yamacraw kernel: SCSI bus is being reset for host 3 channel 0.
Oct 7 17:33:48 yamacraw kernel: SCSI host 3 channel 0 reset (pid 1008737)
timed out - trying harder
Oct 7 17:33:48 yamacraw kernel: SCSI bus is being reset for host 3 channel 0.
where :
[root@yamacraw didier]# cat /proc/scsi/dpt/3
Vendor: DPT Model: PM2654U2 Rev: 211D, scsi 3:
DPT I2O Driver Version: 1.06/1.1:
cmd_per_lun = 210, max_id = 15, max_lun = 7, max_channel = 0
sg_tablesize = 39, irq = 18, OutstandingMsgs = 10
maxfromiopmsgs = 64, maxtoiopmsgs = 210
Devices:
Channel = 0, Target = 0, Lun = 0
Channel = 0, Target = 6, Lun = 0
Can anyone tell me if it seems to be more hardware of software (kernel ?
driver ? related).
Regards, Didier.
-----BEGIN PGP SIGNATURE-----
Version: PGPfreeware 6.5.1 for non-commercial use <http://www.pgp.com>
iQA/AwUBN/0hoF1P+9FfLSJ3EQJ4MgCff0+CNzt7teG2j39bjUS0JFXl9kYAn3ti
tNijdVdurcr0GwZZX2irO83+
=jpsP
-----END PGP SIGNATURE-----
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/