<< snip
Inspecting /boot/System.map
Loaded 7533 symbols from /boot/System.map.
Symbols match kernel version 2.2.10.
Loaded 16 symbols from 2 modules.
klogd 1.3-3, log source = /proc/kmsg started.
<4>Linux version 2.2.10 (root@tux) (gcc version 2.7.2.3) #59 Tue Oct 19
22:57:05 EST 1999
<4>Detected 350799866 Hz processor.
<4>Console: colour VGA+ 80x25
<4>Calibrating delay loop... 699.60 BogoMIPS
<4>Memory: 127968k/131008k available (1068k kernel code, 408k reserved,
1524k data, 40k init)
<5>VFS: Diskquotas version dquot_6.4.0 initialized
<4>CPU: AMD AMD-K6(tm) 3D processor stepping 0c
<6>Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
<6>Checking 'hlt' instruction... OK.
<6>Checking for popad bug... OK.
<4>POSIX conformance testing by UNIFIX
<4>mtrr: v1.35 (19990512) Richard Gooch (rgooch@atnf.csiro.au)
<4>PCI: PCI BIOS revision 2.10 entry at 0xf0560
<4>PCI: Using configuration type 1
<4>PCI: Probing PCI hardware
<6>Linux NET4.0 for Linux 2.2
<6>Based upon Swansea University Computer Society NET3.039
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP Protocols: ICMP, UDP, TCP, IGMP
<4>Initializing RT netlink socket
<4>Starting kswapd v 1.5
<6>Detected PS/2 Mouse Port.
<4>pty: 256 Unix98 ptys configured
<6>Real Time Clock Driver v1.09
<5>ISDN subsystem Rev: 1.55/1.47/1.55/none/none/1.2
<4>RAM disk driver initialized: 16 RAM disks of 4096K size
<4>PCI_IDE: unknown IDE controller on PCI bus 00 device 78, VID=10b9,
DID=5229
<4>PCI_IDE: not 100% native mode: will probe irqs later
<4>PCI_IDE: simplex device: DMA disabled
<4>ide0: PCI_IDE Bus-Master DMA disabled (BIOS)
<4>PCI_IDE: simplex device: DMA disabled
<4>ide1: PCI_IDE Bus-Master DMA disabled (BIOS)
<4>hda: Maxtor 90845D4, ATA DISK drive
<4>hdb: ATAPI CD-ROM DRIVE 40X MAX, ATAPI CDROM drive
<4>hdc: WDC WD205BA, ATA DISK drive
<4>hdd: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<4>ide1 at 0x170-0x177,0x376 on irq 15
<6>hda: Maxtor 90845D4, 8063MB w/256kB Cache, CHS=1027/255/63
<6>hdc: WDC WD205BA, 19574MB w/1961kB Cache, CHS=39770/16/63
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a post-1991 82077
<4>scsi0 : SCSI host adapter emulation for IDE ATAPI devices
<4>scsi : 1 host.
<4> Vendor: IOMEGA Model: ZIP 100 Rev: 14.A
<4> Type: Direct-Access ANSI SCSI revision: 00
<4>Detected scsi removable disk sda at scsi0, channel 0, id 0, lun 0
<4> Vendor: ATAPI Model: CD-ROM DRIVE-40X Rev: 404K
<4> Type: CD-ROM ANSI SCSI revision: 02
<4>scsi : detected 1 SCSI disk total.
<4>SCSI device sda: hdwr sector= 512 bytes. Sectors= 196608 [96 MB] [0.1 GB]
<4>sda: Write Protect is off
<4>Partition check:
<4> sda:scsi0: MEDIUM ERROR on channel 0, id 0, lun 0, CDB: Request Sense 00
00 00 10 00
<4>extra data not valid Current error sd08:00: sense key Medium Error
<4>Additional sense indicates Defect list not found
<4>scsidisk I/O error: dev 08:00, sector 0
<4> unable to read partition table
<4> hda: hda1 hda2 < > hda3
<4> hdc: hdc1 hdc2 hdc3 hdc4 < hdc5 >
<4> hdd:<3>ide-scsi: hdd: unsupported command in request queue (0)
<4>end_request: I/O error, dev 16:40 (hdd), sector 0
<4> unable to read partition table
<4>VFS: Mounted root (ext2 filesystem) readonly.
<4>Freeing unused kernel memory: 40k freed
<6>NET4: Unix domain sockets 1.0 for Linux NET4.0.
<6>Adding Swap: 265068k swap-space (priority -1)
Kernel logging (proc) stopped.
Kernel log daemon terminating.
<<snip
Can anyone tell me what the MEDUIM ERROR means and how do I correct it? If
I try to mount the ZIP manually, I get a "Can't read block device" error
messgae. When I shutdown, all the filesystems seem to hang and won't
unmount.
I've tried a variety of fstab entries for /dev/sda4 /zip ......
and I have a /zip folder.
Thanks
Stanley C. Rogacki, P.E.
Stanley C. Rogacki, P.E.
IDEAS Company
E-mail: ideasco@compuserve.com
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/