*grumble*stupid mailer config...
--------------AA65214B19AEAFD3C113F3F6
Content-Type: message/rfc822
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
X-Mozilla-Status2: 00000000
Message-ID: <384704F7.1E5959EF@zk3.dec.com>
Date: Thu, 02 Dec 1999 18:47:03 -0500
From: Peter Rival <frival@zk3.dec.com>
Organization: Tru64 QMG Performance Engineering
X-Mailer: Mozilla 4.51 [en] (X11; I; Linux 2.2.5-15 i686)
X-Accept-Language: en
MIME-Version: 1.0
To: linux-kernel@vger.rugters.edu, axp-list@redhat.com
Subject: Boot failure on 2.3.29
Content-Type: multipart/alternative;
boundary="------------34DAAD71D5614A60584F96B8"
--------------34DAAD71D5614A60584F96B8
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Hi all,
Just finished configuring an ES40 that I'm hoping to start doing
some "real" performance work on today. I tried building and installing
2.3.29, 2.3.30-pre3, and 2.3.30-pre3+Andrea's Alpha patches...all hung
at the same point in the boot sequence. I'm appending what was left on
the screen from the boot - if you need a full boot log, please let me
know and I'll boot with a serial console. The only difference between
this log (of 2.3.29) and those of 2.3.30-pre3 is that the "Memory: XXXX
available" part looks more correct on the others.
Things to note: 4x 667 MHz EV67 CPUs, 4 GB Mem (4 x 1 GB modules),
builtin IDE CD, all other disks are off of QLogic 1040B and 1020
adapters and a pair of Symbios Logic 53c875s, with a 21140 Tulip
ethernet adapter. *phew*...think that's everything ;) Thanks!
- Pete
Boot log:
zone(1) 0 pages.
zone(2) 0 pages.
Console: colour VGA+ 80x25
Calibrating delay loop... 652.21 BogoMIPS
Memory: 249k available
Buffer-cache hash table entries: 131072 (order: 7, 1048576 bytes)
Page-cache hash table entries: 262144 (order: 8, 2097152 bytes)
SMP starting up secondaries.
recv_secondary_console_msg: on 0 message is 'P01>>>START P01>>>'
Calibrating delay loop... 652.21 BogoMIPS
recv_secondary_console_msg: on 0 message is 'P02>>>START P02>>>'
Calibrating delay loop... 652.21 BogoMIPS
recv_secondary_console_msg: on 0 message is 'P03>>>START P03>>>'
Calibrating delay loop... 652.21 BogoMIPS
SMP: Total of 4 processors activated (2608.86 BogoMIPS).
PCI: Address space collision on region 1 of device Acer Laboratories
Inc. (ALi) M5229 IDE
PCI: Address space collision on region 2 of device Acer Laboratories
Inc. (ALi) M5229 IDE
PCI: Address space collision on region 3 of device Acer Laboratories
Inc. (ALi) M5229 IDE
PCI: Address space collision on region 4 of device Acer Laboratories
Inc. (ALi) M5229 IDE
...and then hung solid - even halt button doesn't work, have to use the
reset button...
--------------34DAAD71D5614A60584F96B8
Content-Type: text/html; charset=us-ascii
Content-Transfer-Encoding: 7bit
<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
Hi all,
Just finished configuring an ES40 that I'm hoping to start doing some "real" performance work on today. I tried building and installing 2.3.29, 2.3.30-pre3, and 2.3.30-pre3+Andrea's Alpha patches...all hung at the same point in the boot sequence. I'm appending what was left on the screen from the boot - if you need a full boot log, please let me know and I'll boot with a serial console. The only difference between this log (of 2.3.29) and those of 2.3.30-pre3 is that the "Memory: XXXX available" part looks more correct on the others.
Things to note: 4x 667 MHz EV67 CPUs, 4 GB Mem (4 x 1 GB modules), builtin IDE CD, all other disks are off of QLogic 1040B and 1020 adapters and a pair of Symbios Logic 53c875s, with a 21140 Tulip ethernet adapter. *phew*...think that's everything ;) Thanks!
- Pete
Boot log:
zone(1) 0 pages.
zone(2) 0 pages.
Console: colour VGA+ 80x25
Calibrating delay loop... 652.21 BogoMIPS
Memory: 249k available
Buffer-cache hash table entries: 131072 (order: 7, 1048576 bytes)
Page-cache hash table entries: 262144 (order: 8, 2097152 bytes)
SMP starting up secondaries.
recv_secondary_console_msg: on 0 message is 'P01>>>START P01>>>'
Calibrating delay loop... 652.21 BogoMIPS
recv_secondary_console_msg: on 0 message is 'P02>>>START P02>>>'
Calibrating delay loop... 652.21 BogoMIPS
recv_secondary_console_msg: on 0 message is 'P03>>>START P03>>>'
Calibrating delay loop... 652.21 BogoMIPS
SMP: Total of 4 processors activated (2608.86 BogoMIPS).
PCI: Address space collision on region 1 of device Acer Laboratories
Inc. (ALi) M5229 IDE
PCI: Address space collision on region 2 of device Acer Laboratories
Inc. (ALi) M5229 IDE
PCI: Address space collision on region 3 of device Acer Laboratories
Inc. (ALi) M5229 IDE
PCI: Address space collision on region 4 of device Acer Laboratories
Inc. (ALi) M5229 IDE
...and then hung solid - even halt button doesn't work, have to use the reset button... --------------34DAAD71D5614A60584F96B8-- --------------AA65214B19AEAFD3C113F3F6-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/