> It might be worth noting that I'm running two SLOT 1 Celeron 300As
> (drilled and soldered to work) on an ASUS P2B-DS board, and I can
AFAIK, nobody else has reported this problem on any other board. It
appears to be exclusive to the BP6. I hold great respect for ASUS boards,
but they're quite a bit more expensive than the BP6 (especially the SMP
boards).
> well). I'm also using a fairly cheap power supply, and I can see the
> voltage drop quite easily when the CPUs are not idling.
Perhaps the BP6 is more sensitive to power fluctuations than other boards
(perhaps poor voltage regulation?)
Mike.
======================================================================
Mike Frisch Email: mfrisch@saturn.tlug.org
Northstar Technologies WWW: http://saturn.tlug.org/~mfrisch
Newmarket, Ontario, CANADA
======================================================================
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/