Re: eepro100 troubles

From: Andrey Savochkin (saw@saw.sw.com.sg)
Date: Thu Jun 08 2000 - 01:35:56 EST


Hello,

There are two different problems here.
The first is hangups, and the second is the initialization failure.
I'm working at both of them.

Best regards
                                        Andrey V.
                                        Savochkin

On Wed, Jun 07, 2000 at 09:14:26PM -0400, Scott R. Every wrote:
> The problem is my machine keeps dying after a day or so of fairly heavy net
> traffic. using 2.2.15. It was rock solid until i put network load on it.
> it was doing HEAVY processing before, but light net load with no trouble.
> It seems the card is locking up, but there are no errors in messages or
> syslog.
> Is there any way to put this card into debug mode?
> do you have any idea why its dying?
>
>
> When it restarts i get a bunch of these:
> eepro100: wait_for_cmd_done timeout!
>
> then this:
> eth0: Transmit timed out: status 0000 0c90 at 0/31 command 0001a000.
> eth0: Tx ring dump, Tx queue 31 / 0:
> eth0: * 0 0001a000.
> eth0: 1 00020000.
> eth0: 2 00030000.
> eth0: 3 00030000.
> eth0: 4 00030000.
> eth0: 5 00030000.
> eth0: 6 00030000.
> eth0: 7 00030000.
> eth0: 8 200c0000.
> eth0: 9 000c0000.
> eth0: 10 00030000.
> eth0: 11 000c0000.
> eth0: 12 00030000.
> eth0: 13 000c0000.
> eth0: 14 00030000.
> eth0: 15 000c0000.
> eth0: 16 200c0000.
> eth0: 17 00030000.
> eth0: 18 00030000.
> eth0: 19 000c0000.
> eth0: 20 000c0000.
> eth0: 21 00030000.
> eth0: 22 000c0000.
> eth0: 23 00030000.
> eth0: 24 200c0000.
> eth0: 25 00030000.
> eth0: 26 000c0000.
> eth0: 27 000c0000.
> eth0: 28 00030000.
> eth0: 29 00030000.
> eth0: 30 40030000.
> eth0: =31 00000000.
> eth0: Printing Rx ring (next to receive into 0, dirty index 0).
> eth0: *= 0 00000001.
> eth0: 1 00000001.
> eth0: 2 00000001.
> eth0: 3 00000001.
> eth0: 4 00000001.
> eth0: 5 00000001.
> eth0: 6 00000001.
> eth0: 7 00000001.
> eth0: 8 00000001.
> eth0: 9 00000001.
> eth0: 10 00000001.
> eth0: 11 00000001.
> eth0: 12 00000001.
> eth0: 13 00000001.
> eth0: 14 00000001.
> eth0: 15 00000001.
> eth0: 16 00000001.
> eth0: 17 00000001.
> eth0: 18 00000001.
> eth0: 19 00000001.
> eth0: 20 00000001.
> eth0: 21 00000001.
> eth0: 22 00000001.
> eth0: 23 00000001.
> eth0: 24 00000001.
> eth0: 25 00000001.
> eth0: 26 00000001.
> eth0: 27 00000001.
> eth0: 28 00000001.
> eth0: 29 00000001.
> eth0: 30 00000001.
> eth0: l 31 c0000002.
>
> any idea what this means? i am starting to use intel cards for all my
> servers and i am now very wary as this is causing huge problems on the
> first server I've tried.
>
> Any help would be appreciated.
-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to majordomo@vger.rutgers.edu



This archive was generated by hypermail 2b29 : Thu Jun 15 2000 - 21:00:40 EST