RE: tulip stability (was eepro100 troubles)

From: Roisman, Dani (DRoisman@station.sony.com)
Date: Fri Jun 09 2000 - 17:14:15 EST

Next message: Urban Widmark: "Re: via-rhine v1.05: Oversized Ethernet frames when in promisc mode"
Previous message: Scott R. Every: "Re: eepro100 troubles"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

When I had problems, netgear recommended that I use the modified tulip.c
included on their driver floppy. You can download the latest one from
www.netgear.com

----
Dani Roisman
droisman@station.sony.com
> -----Original Message-----
> From:	Alan Cox [SMTP:alan@lxorguk.ukuu.org.uk]
> Sent:	Friday, June 09, 00 1:29 PM
> To:	hiryuu@ztnet.com
> Cc:	alan@lxorguk.ukuu.org.uk; hiryuu@ztnet.com;
> rjune@ims1.imagestream-is.com; linux-net@vger.rutgers.edu
> Subject:	Re: tulip stability (was eepro100 troubles)
> 
> > 00:0a.0 Ethernet controller: Lite-On Communications Inc LNE100TX (rev
> 21)
> >         Subsystem: Netgear FA310TX
> >         Flags: bus master, medium devsel, latency 64, IRQ 11
> >         I/O ports at e800
> >         Memory at e3001000 (32-bit, non-prefetchable)
> 
> I've also had trouble with the liteon clones. Dunno if its driver or
> hardware.
> Maybe we are seeing clone specific bugs on the tulip again ?
> 
> 
> 
> -
> To unsubscribe from this list: send the line "unsubscribe linux-net" in
> the body of a message to majordomo@vger.rutgers.edu
-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to majordomo@vger.rutgers.edu

Next message: Urban Widmark: "Re: via-rhine v1.05: Oversized Ethernet frames when in promisc mode"
Previous message: Scott R. Every: "Re: eepro100 troubles"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b29 : Thu Jun 15 2000 - 21:00:40 EST