I connected two PCs back-to-back via a cross cable on COM2 ports.I
configured serial interfaces using
# slattach -p slip -s 9600 /dev/ttyS1
I assigned IP addresses and added route to the routing table.I configured
everything and I run ping command.
ping results are not what I expected. because delay time is about 390.046
ms. this is to much.
I want it to be about 1 ms or less.
Is it something about buffers? how can I configure it?
and is there another way of connecting two PCs via a cross cable
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to firstname.lastname@example.org
This archive was generated by hypermail 2b29 : Sun Jul 15 2001 - 21:00:25 EST