Re: modem setting

Fabio Olive Leite (
Mon, 6 May 1996 18:43:03 -0300 (GRNLNDST)

> anyone knows how to use setserial to configure the modem ?
> I just read the man page but I don't understand what to tell
> setserial about /dev/cua?. I only know that in win3.1 the com
> port of the modem is com3 irq 3 and yhe mouse is on com1 irq4.

well, what irq is your COM2 using (just for checking)?

You should use: setserial /dev/cua2 irq 3

/dev/cua2 is COM3 under DOS.

Read the Serial-HOWTO. Better, check your whole /usr/doc/faq. There's a lot
of good info there.

Hope this helps...
( Fabio Olive Leite )
( Network Administrator -=- Will admin for the fun of it!! )
( )
( )
( GPL'ed Code, Linux Info, PGP Public K and LOTS of Links! )