Re: how to set IRQ of network card

John Vannoy (johnvannoy@bigfoot.com)
Tue, 9 Mar 1999 19:31:13 -0500


-----Original Message-----
From: Ralf G. R. Bergs <rabe@RWTH-Aachen.DE>
To: John Vannoy <johnvannoy@bigfoot.com>; linux-net@vger.rutgers.edu
<linux-net@vger.rutgers.edu>
Date: Tuesday, March 09, 1999 5:41 PM
Subject: Re: how to set IRQ of network card

>On Tue, 09 Mar 1999 16:43:37 -0500, John Vannoy wrote:
>
>>So how do I specify the IRQ setting for the network card?
>
>You can probably "force" it to use the requested IRQ by going into your
CMOS
>setup (PCI section) and enter it there. Other than that there isn't any
>possibility to set the IRQ (to the best of my knowledge.)
>
>(One last idea: it could be possible that you can pass the kernel module
>that drives your card a parameter that forces a specified IRQ, but I doubt
>that since PCI cards are usually initialized by the PCI bios.)
>
>
>--
>Ralf G. R. Bergs * Welkenrather Str. 100/102 * 52074 Aachen * Germany
>+49-241-876892, +49-241-877776 (fax) * rabe@rwth-aachen.de * PGP ok!
>Sign the EU petition against SPAM: http://www.politik-digital.de/spam/
>
>

OK, thanks for the reply. So what do you recommend to get this thing
working? Specifically, what do I do about the message "resource temporarily
unavailable" every time I type "network start"?

Thanks,
John

-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to majordomo@vger.rutgers.edu