UDP with tc

Kishore V Chitrapu (chitrapu@cotton.vislab.olemiss.edu)
Thu, 17 Jun 1999 15:20:06 -0500


HI,

I am trying to restrict the UDP traffic on a port say 5001 port and
70Mbit, but teh following scripts does not allow me do that.I am not able
to control traffic based on this protocol.
I am worried about the 'hashkey' and 'mask' I am using for teh hash table.
Please explain thsese terms usage
Is there any alternative for -flowid- which is not working for route
filter.
===========================================================================
tc class add dev eth0 parent 1:1 classid 1:2 cbq bandwidth 100Mbit rate
$1Mbit \
allot 1514 cell 8 weight 100Kbit prio 3 maxburst 200 avpkt 1000 split 1:0
bounded

tc filter add dev eth0 parent 1:0 protocol ip prio 5 handle 1: u32 divisor
256

tc filter add dev eth0 parent 1:0 prio 5 u32 ht 1:6: \
match ip dst 10.1.1.3 match udp dst 0x1389 0xffff classid 1:2

tc filter add dev eth0 parent 1:0 prio 5 handle ::1 u32 ht 800:: \
match ip nofrag \
offset mask 0x0F00 shift 6 hashkey mask 0x00ff0000 at 8 link 1:
+++++++++++++++++++++++++++++++++++++++++

Thanks in advance,
Kishore

-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to majordomo@vger.rutgers.edu