cannot rcp to linux m/c

Raju K. V. (rajukv@wipinfo.soft.net)
Sat, 19 Jun 1999 17:43:17 +0530 (IST)


hi,

when I try to rcp to my linux m/c I get the foll. error message:

rcp tools.tar.gz rajukv@linpqs:/home/rajukv
stty: standard input: Invalid argument

the .rhosts entry of rajukv@linpqs is "+ +"
The stty setting linux m/c is
stty -a
speed 38400 baud; rows 24; columns 80; line = 0;
intr = ^?; quit = ^\; erase = ^H; kill = ^U; eof = ^D; eol = <undef>;
eol2 = <undef>; start = ^Q; stop = ^S; susp = ^Z; rprnt = ^R; werase = ^W;
lnext = ^V; flush = ^O; min = 1; time = 0;
-parenb -parodd cs8 -hupcl -cstopb cread -clocal -crtscts
-ignbrk brkint ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl ixon
-ixoff -iuclc -ixany imaxbel
opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0
vt0 ff0 isig icanon iexten echo echoe echok -echonl -noflsh -xcase -tostop
-echoprt echoctl echoke

The stty settings of m/c from where I am trying to rcp is
stty -a
speed 9600 baud; rows 24; columns 80;
intr = ^?; quit = ^\; erase = ^H; kill = ^U; eof = ^D; eol = <undef>;
eol2 = <undef>; swtch = <undef>; start = <undef>; stop = <undef>; susp =
^Z;
dsusp = <undef>; rprnt = <undef>; werase = <undef>; lnext = <undef>;
flush = <undef>;
parenb -parodd cs8 hupcl -cstopb cread -clocal
-ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl ixon
-ixoff -iuclc -ixany -imaxbel
opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0
vt0 ff0 isig icanon -iexten echo echoe echok -echonl -noflsh -xcase
-tostop -echoprt -echoctl -echoke

uname -a of my linux m/c is
Linux linpqs 2.0.36 #1 Tue Oct 13 22:17:11 EDT 1998 i586 unknown

I am using redhat 5.2.

Please help.

Thanks and regards,
Raju

p.s.:please cc me in your replies.

-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to majordomo@vger.rutgers.edu