Routing Problem

Sergio A. Carvalho (XSeRgIo@brasirc.net)
Thu, 30 Dec 1999 00:09:29 -0200


Hi list,

I'm with a little routing problem here.I'm working on a linux router box to
provide internet access to a network.The linux box has two NIC's,one is a
3com Combo XL(eth0),and the other is a Lucent Technologies
Wavelan(wireless,eth1).
That's the scheme :
The internet signal comes from eth1(wavelan) and needs to be distributed to
eth0,so the internal network can have internet access.The wavelan board
uses a gateway to receive the signal,that has the ip 200.241.128.225.
When i add a route as default route to the gateway,i can ping the gateway
ip only,but only this.

i did : route add default gw 200.241.128.225 dev eth1
and the route printed this :
0.0.0.0 200.241.128.225 0.0.0.0 eth1

I thought this was ok.But it doesn't worked.What should i do?
...
|
|
|-----| | |-----|
| |--------------------| |
|-----| | |-----|
|
|
| eth0(local network)
|===========|
| linux srv |
| |
|===========|
| eth1(external network)
|
|
|
...
-----==========-----
Sergio De Azevedo Carvalho
XSeRgIo @ IRC | ICQ #: 5819283
RAnet IRCAdmin - BrasIRC NetWorK
ranet.brasirc.net | www.brasirc.net
-----===========-----

-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to majordomo@vger.rutgers.edu