Re: [PATCH v2] clk: bcm2835: Round UART input clock up

[Stefan Wahren]

Hi Ivan,

Am 19.04.22 um 17:05 schrieb Ivan T. Ivanov:
> On 04-18 18:01, Stefan Wahren wrote:
> > > > Do you use the mainline DTS or the vendor DTS to see this issue?
> > > For (open)SUSE we use downstream DTS.
> > This is popular and bad at the same time. We as the mainline kernel
> > developer cannot guarantee that this works as expected. A lot of issues are
> > caused by mixing vendor DTS with mainline kernel, so in general (not for
> > this specific issue) you are on your own with this approach.
> Yep, I am aware of that. I am still trying to recover after recent
> gpio-ranges fiasco, also still working on fixing non-exported firmware
> clocks, which break HDMI output on some of the devices.
I guess, these firmware clock issues are only reproducible with vendor DTS?
> > I know this is a little bit off topic but except from overlay support, can
> > you provide a list of most missing features of the mainline kernel / DTS?
> Well, 260+ overlays for free is not insignificant benefit. Beside few
> breakages from time to time using downstream device tree works fine.

I think the better approach is to add the missing steps for overlay 
support in mainline.

Best regards

> Regards,
> Ivan
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel