[V5 0/2] arm64: dts: qcom: Configure CTS pin to bias-bus-hold for bluetooth

[Vijaya Krishna Nivarthi]

WLAN rail was leaking power during RBSC/sleep even after turning BT off.
Change pinctrl configuration to handle same.

Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@xxxxxxxxxxx>
Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
---
v5: modify subject to include bluetooth
v4: modify subject of each patch to indicate what it is applying to
v3: apply same change to active state and other sc7280*.dts* as well
v2: used bias-bus-hold as per review comments
v1: intial patch used bias-disable for sleep pinctrl in sc7280-idp only
---

Vijaya Krishna Nivarthi (2):
  arm64: dts: qcom: sc7280-idp: Configure CTS pin to bias-bus-hold for
    bluetooth
  arm64: dts: qcom: sc7280-qcard: Configure CTS pin to bias-bus-hold for
    bluetooth

 arch/arm64/boot/dts/qcom/sc7280-idp.dtsi   | 12 ++++++------
 arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi | 13 ++++++++-----
 2 files changed, 14 insertions(+), 11 deletions(-)

-- 
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, hosted by the Linux Foundation.