Re: [PATCH v2 2/9] dt-bindings: nvmem: sfp: Add clock properties

[Rob Herring]

On Fri, 22 Apr 2022 10:51:40 -0400, Sean Anderson wrote:
> To program fuses, it is necessary to set the fuse programming time. This
> is determined based on the value of the platform clock. Add a clock
> property.
> 
> Signed-off-by: Sean Anderson <sean.anderson@xxxxxxxx>
> ---
> 
> (no changes since v1)
> 
>  .../bindings/nvmem/fsl,layerscape-sfp.yaml         | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
> 

Running 'make dtbs_check' with the schema in this patch gives the
following warnings. Consider if they are expected or the schema is
incorrect. These may not be new warnings.

Note that it is not yet a requirement to have 0 warnings for dtbs_check.
This will change in the future.

Full log is available here: https://patchwork.ozlabs.org/patch/


efuse@1e80000: 'clock-names' is a required property
	arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dtb
	arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dtb
	arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dtb
	arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dtb
	arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dtb
	arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dtb
	arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dtb
	arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dtb

efuse@1e80000: 'clocks' is a required property
	arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dtb
	arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dtb
	arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dtb
	arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dtb
	arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dtb
	arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dtb
	arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dtb
	arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dtb