Re: [PATCH v4 1/4] ARM: dts: qcom: apq8064: Use generic node name for DMA

[Bjorn Andersson]

On Thu 21 Apr 10:18 PDT 2022, Kuldeep Singh wrote:

> Qcom BAM DT spec expects generic DMA controller node name as
> "dma-controller" to enable validations.
> 
> Signed-off-by: Kuldeep Singh <singh.kuldeep87k@xxxxxxxxx>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>

It seems that I picked up v3, but patchwork-bot didn't send out any
notifications.

Please double check linux-next to confirm that we got them all sorted
out.

Thanks,
Bjorn

> ---
>  arch/arm/boot/dts/qcom-apq8064.dtsi | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
> index a1c8ae516d21..b2975be3ae04 100644
> --- a/arch/arm/boot/dts/qcom-apq8064.dtsi
> +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
> @@ -1040,7 +1040,7 @@ sata0: sata@29000000 {
>  		};
>  
>  		/* Temporary fixed regulator */
> -		sdcc1bam:dma@12402000{
> +		sdcc1bam: dma-controller@12402000{
>  			compatible = "qcom,bam-v1.3.0";
>  			reg = <0x12402000 0x8000>;
>  			interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
> @@ -1050,7 +1050,7 @@ sdcc1bam:dma@12402000{
>  			qcom,ee = <0>;
>  		};
>  
> -		sdcc3bam:dma@12182000{
> +		sdcc3bam: dma-controller@12182000{
>  			compatible = "qcom,bam-v1.3.0";
>  			reg = <0x12182000 0x8000>;
>  			interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>;
> @@ -1060,7 +1060,7 @@ sdcc3bam:dma@12182000{
>  			qcom,ee = <0>;
>  		};
>  
> -		sdcc4bam:dma@121c2000{
> +		sdcc4bam: dma-controller@121c2000{
>  			compatible = "qcom,bam-v1.3.0";
>  			reg = <0x121c2000 0x8000>;
>  			interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
> -- 
> 2.25.1
>