Re: [PATCH v2 2/2] dt-bindings: hwmon: update TI TPS23861 bindings with per-port schema

[Krzysztof Kozlowski]

On 13/08/2025 05:00, Gregory Fuchedgi wrote:
> On Tue, Aug 12, 2025 at 12:20 AM Krzysztof Kozlowski <krzk@xxxxxxxxxx> wrote:
>>> +  shutdown-gpios:
>> powerdown-gpios, see gpio-consumer-common.yaml
> It is called shutdown in the datasheet, but seems like neither powerdown nor
> shutdown truly reflects its purpose. This pin doesn't power down the controller
> itself. It shuts down the ports while keeping the controller available for
> configuration over i2c. Should I call it ti,ports-shutdown-gpios or maybe
> ti,shutdown-gpios? Any other suggestions?


Feels more like enable-gpios.

> 
>>> +patternProperties:
>>> +  "^port@[0-3]$":
>> This goes to ports property.
> Do you mean I should add another DT node that groups all ports? such as:
> compatible = "ti,tps23861"; ports { port@0 {...} port@1 {...} }


Yes.

> 
> If that's the case would it make sense to use "^.*$" pattern to allow any name
> and drop the port label? Is patternProperties even needed in this case?


You should use standard graph bindings, so:

git grep 'ref' -- Documentation/devicetree/bindings/ | grep ports


> 
>>> +        tps23861@28 {
>> Node names should be generic. See also an explanation and list of
> Ack. Should I also fix the existing example in this patch?


You can, up to you.

> 
>>> +            label = "my_poe_controller";
>> Use useful names or just drop it.
> I thought this is good as an example? A useful name would be board specific.


Then it should be board specific. You add here real and the most
complete example.


Best regards,
Krzysztof