[PATCH v3 1/2] iio: pressure: bmp280: Use IS_ERR() in bmp280_common_probe()

[Salah Triki]

`devm_gpiod_get_optional()` may return non-NULL error pointer on failure.
Check its return value using `IS_ERR()` and propagate the error if
necessary.

Fixes: df6e71256c84 ("iio: pressure: bmp280: Explicitly mark GPIO optional")
Cc: David Lechner <dlechner@xxxxxxxxxxxx>
Cc: Jonathan Cameron <jic23@xxxxxxxxxx>
Cc: Andy Shevchenko <andy@xxxxxxxxxx>
Cc: Nuno Sá <nuno.sa@xxxxxxxxxx>
Cc: Markus Elfring <Markus.Elfring@xxxxxx>
Signed-off-by: Salah Triki <salah.triki@xxxxxxxxx>
Reviewed-by: David Lechner <dlechner@xxxxxxxxxxxx>
---
 drivers/iio/pressure/bmp280-core.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c
index 74505c9ec1a0..6cdc8ed53520 100644
--- a/drivers/iio/pressure/bmp280-core.c
+++ b/drivers/iio/pressure/bmp280-core.c
@@ -3213,11 +3213,12 @@ int bmp280_common_probe(struct device *dev,
 
 	/* Bring chip out of reset if there is an assigned GPIO line */
 	gpiod = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(gpiod))
+		return dev_err_probe(dev, PTR_ERR(gpiod), "failed to get reset GPIO\n");
+
 	/* Deassert the signal */
-	if (gpiod) {
-		dev_info(dev, "release reset\n");
-		gpiod_set_value(gpiod, 0);
-	}
+	dev_info(dev, "release reset\n");
+	gpiod_set_value(gpiod, 0);
 
 	data->regmap = regmap;
 
-- 
2.43.0