Re: [RESEND v2 1/1] dt-bindings: soc: add vf610 reboot syscon controller

[Rob Herring (Arm)]

On Mon, 18 Aug 2025 14:34:26 -0400, Frank Li wrote:
> Add vf610 reboot controller, which used to reboot whole system. Fix below
> CHECK_DTB warnings:
> 
> arch/arm/boot/dts/nxp/vf/vf610-bk4.dtb: /soc/bus@40000000/src@4006e000:
>     failed to match any schema with compatible: ['fsl,vf610-src', 'syscon']
> 
> IC reference manual call it as system reset controller(SRC), but it is not
> module as linux reset controller, which used to reset individual device.
> SRC work as reboot controller, which reboot whole system. It provides a
> syscon interface to syscon-reboot.
> 
> Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
> ---
> Change in v2
> - change description to avoid confuse about reset controller.
> - it is legacy device, more than 10 year. So try keep existed dts as it.
> ---
>  .../bindings/soc/fsl/fsl,vf610-src.yaml       | 47 +++++++++++++++++++
>  1 file changed, 47 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/soc/fsl/fsl,vf610-src.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/fsl/fsl,vf610-src.yaml: $id: 'http://devicetree.org/schemas//soc/fsl/fsl,vf610-src.yaml#' does not match 'http://devicetree.org/schemas(/[^/ ]+)+\\.yaml#'
	from schema $id: http://devicetree.org/meta-schemas/base.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250818183427.3601986-1-Frank.Li@xxxxxxx

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.