Re: [PATCH 2/6] dt-bindings: iio: mcp9600: Add microchip,mcp9601 and add constraints

[Rob Herring (Arm)]

On Mon, 18 Aug 2025 14:32:10 -0400, Ben Collins wrote:
> From: Ben Collins <bcollins@xxxxxxxxxx>
> 
> Add microchip,mcp9601 compatible in addition to the original
> microchip,mcp9600 to designate support between these two chips.
> 
> The current dt-binding has open-circuit and short-circuit as interrupt
> names, but these are only supported in mcp9601.
> 
> The OC and SC detection requires that mcp9601 VSENSE be wired up, which
> not only enables the OC SC interrupts, but also the OC and SC status
> register bits.
> 
> Add a microchip,vsense boolean to show the chip is wired for this
> support.
> 
> Add constraints so this feature only applies if the mcp9601 compatible
> is selected.
> 
> Signed-off-by: Ben Collins <bcollins@xxxxxxxxxx>
> ---
>  .../iio/temperature/microchip,mcp9600.yaml    | 60 ++++++++++++++++++-
>  1 file changed, 57 insertions(+), 3 deletions(-)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/temperature/microchip,mcp9600.yaml: properties:interrupt-names:items:enum: ['open-circuit', 'short-circuit', 'alert1', 'alert2', 'alert3', 'alert4', 'open-circuit', 'short-circuit'] has non-unique elements
	hint: "enum" must be an array of either integers or strings
	from schema $id: http://devicetree.org/meta-schemas/keywords.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250818183214.380847-3-bcollins@xxxxxxxxxx

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.