[PATCH v1] spi: microchip-core-qspi: stop checking viability of op->max_freq in supports_op callback

[Conor Dooley]

From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>

In commit 13529647743d9 ("spi: microchip-core-qspi: Support per spi-mem
operation frequency switches") the logic for checking the viability of
op->max_freq in mchp_coreqspi_setup_clock() was copied into
mchp_coreqspi_supports_op(). Unfortunately, op->max_freq is not valid
when this function is called during probe but is instead zero.
Accordingly, baud_rate_val is calculated to be INT_MAX due to division
by zero, causing probe of the attached memory device to fail.

Seemingly spi-microchip-core-qspi was the only driver that had such a
modification made to its supports_op callback when the per_op_freq
capability was added, so just remove it to restore prior functionality.

CC: stable@xxxxxxxxxxxxxxx
Reported-by: Valentina Fernandez <valentina.fernandezalanis@xxxxxxxxxxxxx>
Fixes: 13529647743d9 ("spi: microchip-core-qspi: Support per spi-mem operation frequency switches")
Signed-off-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
---
CC: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
CC: Daire McNamara <daire.mcnamara@xxxxxxxxxxxxx>
CC: Mark Brown <broonie@xxxxxxxxxx>
CC: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
CC: linux-spi@xxxxxxxxxxxxxxx
CC: linux-kernel@xxxxxxxxxxxxxxx
---
 drivers/spi/spi-microchip-core-qspi.c | 12 ------------
 1 file changed, 12 deletions(-)

diff --git a/drivers/spi/spi-microchip-core-qspi.c b/drivers/spi/spi-microchip-core-qspi.c
index d13a9b755c7f8..8dc98b17f77b5 100644
--- a/drivers/spi/spi-microchip-core-qspi.c
+++ b/drivers/spi/spi-microchip-core-qspi.c
@@ -531,10 +531,6 @@ static int mchp_coreqspi_exec_op(struct spi_mem *mem, const struct spi_mem_op *o
 
 static bool mchp_coreqspi_supports_op(struct spi_mem *mem, const struct spi_mem_op *op)
 {
-	struct mchp_coreqspi *qspi = spi_controller_get_devdata(mem->spi->controller);
-	unsigned long clk_hz;
-	u32 baud_rate_val;
-
 	if (!spi_mem_default_supports_op(mem, op))
 		return false;
 
@@ -557,14 +553,6 @@ static bool mchp_coreqspi_supports_op(struct spi_mem *mem, const struct spi_mem_
 			return false;
 	}
 
-	clk_hz = clk_get_rate(qspi->clk);
-	if (!clk_hz)
-		return false;
-
-	baud_rate_val = DIV_ROUND_UP(clk_hz, 2 * op->max_freq);
-	if (baud_rate_val > MAX_DIVIDER || baud_rate_val < MIN_DIVIDER)
-		return false;
-
 	return true;
 }
 
-- 
2.47.2