[PATCH 10/15] dt-bindings: iio: adc: adi,ad4030: Add adi,clock-mode

[Marcelo Schmitt]

AD4030 and similar designs support three different options for the clock
that frames ADC output data. Each option implies a different hardware
configuration for reading ADC data. Document AD4030 clock mode options.

Co-developed-by: Sergiu Cuciurean <sergiu.cuciurean@xxxxxxxxxx>
Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@xxxxxxxxxx>
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
---
 .../devicetree/bindings/iio/adc/adi,ad4030.yaml      | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad4030.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad4030.yaml
index bee85087a7b2..1e4e025b835f 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad4030.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad4030.yaml
@@ -78,6 +78,18 @@ properties:
   interrupt-names:
     const: busy
 
+  adi,clock-mode:
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [ spi, echo, host ]
+    default: spi
+    description:
+      Describes how the clock that frames ADC data output is setup.
+      spi  - Spi-compatible. Normal SPI operation clocking.
+      echo - Echo-clock. Synchronous clock echoing to ease timing requirements
+             when using isolation on the digital interface.
+      host - Host. The Host clock mode uses an internal oscillator to clock out
+             the data bits. In this mode, the spi controller is not driving SCLK.
+
 required:
   - compatible
   - reg
-- 
2.39.2