[PATCH] mfd: max77705: rework interrupts

[Dzmitry Sankouski]

Current implementation describes only MFD's own topsys interrupts.
However, max77705 has a register which indicates interrupt source, i.e.
it acts as an interrupt controller. There's 4 interrupt sources in
max77705: topsys, charger, fuelgauge, usb type-c manager.

Setup max77705 MFD parent as an interrupt controller. Leave topsys
interrupts unregistered, because currently unused.

Fixes: c8d50f029748 ("mfd: Add new driver for MAX77705 PMIC")

Signed-off-by: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
---
Max77705 has a register, which indicates, who is triggering irq. There
may be 4 irq sources in max77705: charger, fuelgauge, usb type-c
manager ic, and so-called 'topsys'. Hence, max77705 mfd parent device is
an interrupt controller. This series implements interrupt controller in
max77705 mfd.
---
 drivers/mfd/max77705.c | 26 ++++++++++++++++++--------
 1 file changed, 18 insertions(+), 8 deletions(-)

diff --git a/drivers/mfd/max77705.c b/drivers/mfd/max77705.c
index 6b263bacb8c2..076357cb77a9 100644
--- a/drivers/mfd/max77705.c
+++ b/drivers/mfd/max77705.c
@@ -61,6 +61,23 @@ static const struct regmap_config max77705_regmap_config = {
 	.max_register = MAX77705_PMIC_REG_USBC_RESET,
 };
 
+static const struct regmap_irq max77705_irqs[] = {
+	{ .mask = MAX77705_SRC_IRQ_CHG, },
+	{ .mask = MAX77705_SRC_IRQ_TOP, },
+	{ .mask = MAX77705_SRC_IRQ_FG, },
+	{ .mask = MAX77705_SRC_IRQ_USBC, },
+};
+
+static const struct regmap_irq_chip max77705_irq_chip = {
+	.name		= "max77705",
+	.status_base	= MAX77705_PMIC_REG_INTSRC,
+	.ack_base	= MAX77705_PMIC_REG_INTSRC,
+	.mask_base	= MAX77705_PMIC_REG_INTSRC_MASK,
+	.num_regs	= 1,
+	.irqs		= max77705_irqs,
+	.num_irqs	= ARRAY_SIZE(max77705_irqs),
+};
+
 static const struct regmap_irq max77705_topsys_irqs[] = {
 	{ .mask = MAX77705_SYSTEM_IRQ_BSTEN_INT, },
 	{ .mask = MAX77705_SYSTEM_IRQ_SYSUVLO_INT, },
@@ -111,18 +128,11 @@ static int max77705_i2c_probe(struct i2c_client *i2c)
 	ret = devm_regmap_add_irq_chip(dev, max77705->regmap,
 					i2c->irq,
 					IRQF_ONESHOT | IRQF_SHARED, 0,
-					&max77705_topsys_irq_chip,
+					&max77705_irq_chip,
 					&irq_data);
 	if (ret)
 		return dev_err_probe(dev, ret, "Failed to add IRQ chip\n");
 
-	/* Unmask interrupts from all blocks in interrupt source register */
-	ret = regmap_update_bits(max77705->regmap,
-				 MAX77705_PMIC_REG_INTSRC_MASK,
-				 MAX77705_SRC_IRQ_ALL, (unsigned int)~MAX77705_SRC_IRQ_ALL);
-	if (ret < 0)
-		return dev_err_probe(dev, ret, "Could not unmask interrupts in INTSRC\n");
-
 	domain = regmap_irq_get_domain(irq_data);
 
 	ret = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE,

---
base-commit: 3cace99d63192a7250461b058279a42d91075d0c
change-id: 20250831-max77705-fix_interrupt_handling-0889cee6936d

Best regards,
-- 
Dzmitry Sankouski <dsankouski@xxxxxxxxx>