Re: [PATCH v3 8/8] arm64: dts: qcom: x1e80100-crd: Add charge limit nvmem

[Konrad Dybcio]

On 8/26/25 9:18 AM, Fenglin Wu via B4 Relay wrote:
> From: Fenglin Wu <fenglin.wu@xxxxxxxxxxxxxxxx>
> 
> Add nvmem cells for getting charge control thresholds if they have
> been set previously.
> 
> Signed-off-by: Fenglin Wu <fenglin.wu@xxxxxxxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/x1-crd.dtsi         |  2 ++
>  arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi | 20 ++++++++++++++++++++
>  2 files changed, 22 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/x1-crd.dtsi b/arch/arm64/boot/dts/qcom/x1-crd.dtsi
> index c9f0d505267081af66b0973fe6c1e33832a2c86b..8c3d30dd936ef9b12867971f5f237dd12484072d 100644
> --- a/arch/arm64/boot/dts/qcom/x1-crd.dtsi
> +++ b/arch/arm64/boot/dts/qcom/x1-crd.dtsi
> @@ -82,6 +82,8 @@ pmic-glink {
>  				    <&tlmm 123 GPIO_ACTIVE_HIGH>,
>  				    <&tlmm 125 GPIO_ACTIVE_HIGH>;
>  
> +		nvmem-cells = <&charge_limit_en>, <&charge_limit_end>, <&charge_limit_delta>;
> +		nvmem-cell-names = "charge_limit_en", "charge_limit_end", "charge_limit_delta";

1 a line would be preferred, and we try to keep a newline between
the last property and the following subnodes (i.e. before the
comment in this case), please adjust accordingly.


>  		/* Left-side rear port */
>  		connector@0 {
>  			compatible = "usb-c-connector";
> diff --git a/arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi b/arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi
> index c02fd4d15c9649c222caaafa5ed2c777a10fb4f5..abf7afe5127d7b8b572513234e00009ce837837d 100644
> --- a/arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi
> +++ b/arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi
> @@ -239,6 +239,26 @@ reboot_reason: reboot-reason@48 {
>  			};
>  		};
>  
> +		pmk8550_sdam_15: nvram@7e00 {
> +			compatible = "qcom,spmi-sdam";
> +			reg = <0x7e00>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges = <0 0x7e00 0x100>;
> +
> +			charge_limit_en: charge-limit-en@73 {
> +				reg = <0x73 0x1>;
> +			};
> +
> +			charge_limit_end: charge-limit-end@75 {
> +				reg = <0x75 0x1>;
> +			};
> +
> +			charge_limit_delta: charge-limit-delta@75 {
> +				reg = <0x76 0x1>;
> +			};

These addresses look in line with the SDAM assignment document.

Konrad