[PATCH 2/2] arm64: dts: qcom: sdm845-starqltechn: add slpi support

[Dzmitry Sankouski]

Add support for Qualcomm sensor low power island.

Signed-off-by: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
---
 .../boot/dts/qcom/sdm845-samsung-starqltechn.dts   | 24 ++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
index 32ce666fc57e..2c1157ee7b2d 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
@@ -902,6 +902,14 @@ &ipa {
 	status = "okay";
 };
 
+&slpi_pas {
+	firmware-name = "qcom/sdm845/starqltechn/slpi.mbn";
+	pinctrl-0 = <&slpi_ldo_active_state>;
+	pinctrl-1 = <&slpi_ldo_sleep_state>;
+	pinctrl-names = "default", "sleep";
+	status = "okay";
+};
+
 &usb_1 {
 	status = "okay";
 };
@@ -1028,6 +1036,22 @@ sd_card_det_n_state: sd-card-det-n-state {
 		bias-pull-up;
 	};
 
+	slpi_ldo_active_state: slpi-ldo-active-state {
+		pins = "gpio8";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+
+	slpi_ldo_sleep_state: slpi-ldo-sleep-state {
+		pins = "gpio8";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
 	touch_irq_state: touch-irq-state {
 		pins = "gpio120";
 		function = "gpio";

-- 
2.39.5