Re: [PATCH v5 3/3] arm64: dts: qcom: lemans-evk-camera: Add DT overlay

[Dmitry Baryshkov]

On Thu, Sep 11, 2025 at 07:55:16PM +0800, Wenmeng Liu wrote:
> Enable IMX577 via CCI1 on LeMans EVK Core Kit.
> 
> The LeMans EVK board does not include a camera sensor
> by default, this overlay reflects the possibility of
> attaching an optional camera sensor.
> For this reason, the camera sensor configuration is
> placed in lemans-evk-camera.dtso, rather than
> modifying the base lemans-evk.dts.

So, is it the only camera configuration that we are going to support?
If not, what happens when we get the second sensor or second set of
sensors to support?

> 
> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
> Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
> Signed-off-by: Wenmeng Liu <quic_wenmliu@xxxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/Makefile               |  4 +
>  arch/arm64/boot/dts/qcom/lemans-evk-camera.dtso | 97 +++++++++++++++++++++++++

At least the filename should mention that this is imx577.

>  2 files changed, 101 insertions(+)

-- 
With best wishes
Dmitry