[PATCH 05/20] arm64: dts: qcom: kaanapali: Add SDC2 nodes for Kaanapali soc

[Jingyi Wang]

From: Manish Pandey <manish.pandey@xxxxxxxxxxxxxxxx>

Add SD Card host controller for kaanapali soc.

Signed-off-by: Manish Pandey <manish.pandey@xxxxxxxxxxxxxxxx>
Signed-off-by: Jingyi Wang <jingyi.wang@xxxxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/kaanapali.dtsi | 104 ++++++++++++++++++++++++++++++++
 1 file changed, 104 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/kaanapali.dtsi b/arch/arm64/boot/dts/qcom/kaanapali.dtsi
index 07dc112065d1..ae1721cfbffc 100644
--- a/arch/arm64/boot/dts/qcom/kaanapali.dtsi
+++ b/arch/arm64/boot/dts/qcom/kaanapali.dtsi
@@ -908,6 +908,56 @@ lpass_ag_noc: interconnect@7f40000 {
 			#interconnect-cells = <2>;
 		};
 
+		sdhc_2: mmc@8804000 {
+			compatible = "qcom,kaanapali-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0 0x08804000 0 0x1000>;
+
+			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface", "core", "xo";
+
+			interconnects = <&aggre_noc MASTER_SDCC_2 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_SDCC_2 QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "sdhc-ddr", "cpu-sdhc";
+
+			power-domains = <&rpmhpd RPMHPD_CX>;
+			operating-points-v2 = <&sdhc2_opp_table>;
+
+			qcom,dll-config = <0x0007442c>;
+			qcom,ddr-config = <0x80040868>;
+
+			iommus = <&apps_smmu 0x540 0x0>;
+			dma-coherent;
+
+			resets = <&gcc GCC_SDCC2_BCR>;
+			status = "disabled";
+
+			sdhc2_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					opp-peak-kBps = <160000 100000>;
+					opp-avg-kBps = <50000 0>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+
+				opp-202000000 {
+					opp-hz = /bits/ 64 <202000000>;
+					opp-peak-kBps = <200000 120000>;
+					opp-avg-kBps = <104000 0>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+			};
+		};
+
 		pdc: interrupt-controller@b220000 {
 			compatible = "qcom,kaanapali-pdc", "qcom,pdc";
 			reg = <0x0 0x0b220000 0x0 0x10000>,
@@ -974,6 +1024,60 @@ qup_uart7_default: qup-uart7-state {
 				 drive-strength = <2>;
 				 bias-disable;
 			};
+
+			sdc2_default: sdc2-default-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				card-detect-pins {
+					pins = "gpio55";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			sdc2_sleep: sdc2-sleep-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				card-detect-pins {
+					pins = "gpio55";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
 		};
 
 		sram@14680000 {

-- 
2.25.1