[PATCH v2 11/24] arm64: dts: qcom: Add PMCX0102 pmic dtsi

[Pankaj Patil]

From: Kamal Wadhwa <kamal.wadhwa@xxxxxxxxxxxxxxxx>

Add base DTS file for PMCX0102 along with temp-alarm and GPIO
nodes.

Signed-off-by: Kamal Wadhwa <kamal.wadhwa@xxxxxxxxxxxxxxxx>
Signed-off-by: Pankaj Patil <pankaj.patil@xxxxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/pmcx0102.dtsi | 179 +++++++++++++++++++++++++++++++++
 1 file changed, 179 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/pmcx0102.dtsi b/arch/arm64/boot/dts/qcom/pmcx0102.dtsi
new file mode 100644
index 0000000000000000000000000000000000000000..839738dda6cd5016df134a2fddd92d3ae7c56133
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pmcx0102.dtsi
@@ -0,0 +1,179 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus0 {
+	pmcx0102_c_e0: pmic@2 {
+		compatible = "qcom,pmcx0102", "qcom,spmi-pmic";
+		reg = <0x2 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmcx0102_c_e0_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmcx0102_c_e0_gpios: gpio@8800 {
+			compatible = "qcom,pmcx0102-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmcx0102_c_e0_gpios 0 0 14>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmcx0102_d_e0: pmic@3 {
+		compatible = "qcom,pmcx0102", "qcom,spmi-pmic";
+		reg = <0x3 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmcx0102_d_e0_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x3 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmcx0102_d_e0_gpios: gpio@8800 {
+			compatible = "qcom,pmcx0102-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmcx0102_d_e0_gpios 0 0 14>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmcx0102_e_e0: pmic@4 {
+		compatible = "qcom,pmcx0102", "qcom,spmi-pmic";
+		reg = <0x4 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmcx0102_e_e0_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x4 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmcx0102_e_e0_gpios: gpio@8800 {
+			compatible = "qcom,pmcx0102-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmcx0102_e_e0_gpios 0 0 14>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmcx0102_g_e0: pmic@5 {
+		compatible = "qcom,pmcx0102", "qcom,spmi-pmic";
+		reg = <0x6 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmcx0102_g_e0_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x6 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmcx0102_g_e0_gpios: gpio@8800 {
+			compatible = "qcom,pmcx0102-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmcx0102_g_e0_gpios 0 0 14>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
+
+&spmi_bus1 {
+	pmcx0102_c_e1: pmic@2 {
+		compatible = "qcom,pmcx0102", "qcom,spmi-pmic";
+		reg = <0x2 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmcx0102_c_e1_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmcx0102_c_e1_gpios: gpio@8800 {
+			compatible = "qcom,pmcx0102-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmcx0102_c_e1_gpios 0 0 14>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmcx0102_d_e1: pmic@3 {
+		compatible = "qcom,pmcx0102", "qcom,spmi-pmic";
+		reg = <0x3 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmcx0102_d_e1_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x3 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmcx0102_d_e1_gpios: gpio@8800 {
+			compatible = "qcom,pmcx0102-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmcx0102_d_e1_gpios 0 0 14>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmcx0102_e_e1: pmic@4 {
+		compatible = "qcom,pmcx0102", "qcom,spmi-pmic";
+		reg = <0x4 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmcx0102_e_e1_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x4 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmcx0102_e_e1_gpios: gpio@8800 {
+			compatible = "qcom,pmcx0102-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmcx0102_e_e0_gpios 0 0 14>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};

-- 
2.34.1