[PATCH 5/8] arm64: dts: qcom: sdm845-oneplus: Correct panel reset gpio polarity

[David Heidelberg via B4 Relay]

From: David Heidelberg <david@xxxxxxx>

Reset GPIO should be active in high state as usually the board doesn't
invert the polarity.

Fixes: 288ef8a42612 ("arm64: dts: sdm845: add oneplus6/6t devices")
Signed-off-by: David Heidelberg <david@xxxxxxx>
---
 arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
index aff5e80c1eba43e830991c2afd53b6322893cd27..7f968f90a83b869395bedd5de510ba96de3c4e94 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
@@ -456,7 +456,7 @@ display_panel: panel@0 {
 		vci-supply = <&panel_vci_3v3>;
 		poc-supply = <&panel_vddi_poc_1p8>;
 
-		reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&panel_reset_pins &panel_te_pin &panel_esd_pin>;

-- 
2.51.0