Re: [PATCH 08/20] arm64: dts: qcom: Add PMK8850 pmic dtsi

[Konrad Dybcio]

On 9/25/25 2:17 AM, Jingyi Wang wrote:
> From: Jishnu Prakash <jishnu.prakash@xxxxxxxxxxxxxxxx>
> 
> Add base DTS file for PMK8850 including PON, GPIO, RTC and SDAM nodes.
> 
> Signed-off-by: Jishnu Prakash <jishnu.prakash@xxxxxxxxxxxxxxxx>
> Signed-off-by: Kamal Wadhwa <kamal.wadhwa@xxxxxxxxxxxxxxxx>
> Signed-off-by: Jingyi Wang <jingyi.wang@xxxxxxxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/pmk8850.dtsi | 66 +++++++++++++++++++++++++++++++++++
>  1 file changed, 66 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/pmk8850.dtsi b/arch/arm64/boot/dts/qcom/pmk8850.dtsi
> new file mode 100644
> index 000000000000..c19a98ca984b
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/pmk8850.dtsi
> @@ -0,0 +1,66 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
> + */
> +
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/input/linux-event-codes.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/spmi/spmi.h>
> +
> +&spmi_bus0 {
> +	pmic@0 {
> +		compatible = "qcom,pmk8850", "qcom,spmi-pmic";
> +		reg = <0x0 SPMI_USID>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		pmk8850_pon: pon@1300 {
> +			compatible = "qcom,pmk8350-pon";
> +			reg = <0x1300>, <0x800>;
> +			reg-names = "hlos", "pbs";

1 reg and -name per line, please

[...]

> +		pmk8850_rtc: rtc@6100 {
> +			compatible = "qcom,pmk8350-rtc";
> +			reg = <0x6100>, <0x6200>;
> +			reg-names = "rtc", "alarm";

and here

with that:

Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>

Konrad