[PATCH v2 1/6] iio: adc: ad4080: fix chip identification
From: Antoniu Miclaus
Date: Tue Sep 30 2025 - 06:32:58 EST
Fix AD4080 chip identification by using the correct 16-bit product ID
(0x0050) instead of GENMASK(2, 0). Update the chip reading logic to
use regmap_bulk_read to read both PRODUCT_ID_L and PRODUCT_ID_H
registers and combine them into a 16-bit value.
The original implementation was incorrectly reading only 3 bits,
which would not correctly identify the AD4080 chip.
Fixes: 6b31ba1811b6 ("iio: adc: ad4080: add driver support")
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
---
changes in v2:
- add the chip id handling into a separate commit.
- use regmap_bulk_read.
drivers/iio/adc/ad4080.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/iio/adc/ad4080.c b/drivers/iio/adc/ad4080.c
index 6e61787ed321..b80560aebe2d 100644
--- a/drivers/iio/adc/ad4080.c
+++ b/drivers/iio/adc/ad4080.c
@@ -125,7 +125,7 @@
/* Miscellaneous Definitions */
#define AD4080_SPI_READ BIT(7)
-#define AD4080_CHIP_ID GENMASK(2, 0)
+#define AD4080_CHIP_ID 0x0050
#define AD4080_LVDS_CNV_CLK_CNT_MAX 7
@@ -458,10 +458,11 @@ static int ad4080_setup(struct iio_dev *indio_dev)
if (ret)
return ret;
- ret = regmap_read(st->regmap, AD4080_REG_CHIP_TYPE, &id);
+ ret = regmap_bulk_read(st->regmap, AD4080_REG_PRODUCT_ID_L, &id, 2);
if (ret)
return ret;
+ id = get_unaligned_le16(&id);
if (id != AD4080_CHIP_ID)
dev_info(dev, "Unrecognized CHIP_ID 0x%X\n", id);
--
2.43.0