Re: [PATCH v2] pinctrl: renesas: rzg2l: Fix ISEL restore on resume

[Claudiu Beznea]

Hi, Geert,

On 9/29/25 15:10, Claudiu Beznea wrote:
>> This conflicts with commit d57183d06851bae4 ("pinctrl: renesas: rzg2l:
>> Drop unnecessary pin configurations"), which I have already queued
>> in renesas-drivers/renesas-pinctrl-for-v6.19.  Hence I am replacing
>> the above hunk by:
>>
>>             /* Switching to GPIO is not required if reset value is
>> same as func */
>>             reg = readb(pctrl->base + PMC(off));
>>     -       spin_lock_irqsave(&pctrl->lock, flags);
>>     +       raw_spin_lock_irqsave(&pctrl->lock, flags);
>>             pfc = readl(pctrl->base + PFC(off));
>>             if ((reg & BIT(pin)) && (((pfc >> (pin * 4)) & PFC_MASK) == func)) {
>>     -               spin_unlock_irqrestore(&pctrl->lock, flags);
>>     +               raw_spin_unlock_irqrestore(&pctrl->lock, flags);
>>                     return;
>>             }
>>
>> while applying.
> This is right. Thank you! I'm going to give it also a try (on actual HW) a
> bit later. I'll let you know.

Sorry for the delay, all looks good to me (checked on RZ/G3S).

Thank you,
Claudiu

> 
> Thank you,
> Claudiu