[PATCH v3 0/3] riscv: dts: spacemit: add 24c02 eeprom on BPI-F3

[Aurelien Jarno]

The BPI-F3 board has a 24c02 eeprom connected to the i2c bus #2. It
holds board data. This patchset adds support for it.

Changes between version 2 and version 3:
  
- Revert the name change for i2c2-0-cfg and i2c2-0-pins, the second cell
  is not a function number, but an index.

Here is version 2 of this series:
  https://lore.kernel.org/lkml/20250923205028.2355244-1-aurelien@xxxxxxxxxxx/  

Changes between version 1 and version 2:
 - Rename i2c2-0-cfg and i2c2-0-pins into i2c2-4-cfg and i2c2-4-pins to match
   the naming convention encoding the function number in the second cell.
 - Rename the 24c02 supply name label to buck3_1v8
 - Add a onie,tlv-layout nvmem layout describing the content of the 24c02 eeprom

Here is version 1 of this series:
  https://lore.kernel.org/lkml/20250921210237.943370-1-aurelien@xxxxxxxxxxx/


Aurelien Jarno (3):
  riscv: dts: spacemit: enable the i2c2 adapter on BPI-F3
  riscv: dts: spacemit: add 24c02 eeprom on BPI-F3
  riscv: dts: spacemit: add i2c aliases on BPI-F3

 .../boot/dts/spacemit/k1-bananapi-f3.dts      | 33 ++++++++++++++++++-
 arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi  |  7 ++++
 arch/riscv/boot/dts/spacemit/k1.dtsi          | 13 ++++++++
 3 files changed, 52 insertions(+), 1 deletion(-)

-- 
2.47.2