[PATCH 0/2] Add support for Pixel 3 and Pixel 3 XL

[David Heidelberg via B4 Relay]

This adds initial device tree support for the following phones:

 - Google Pixel 3 (blueline)
 - Google Pixel 3 XL (crosshatch)

Both phone boards use the same identifiers and differ only slightly
in their connected peripherals.

Supported functionality includes:
 - Debug UART
 - UFS
 - Charger
 - USB-C (peripheral mode)
 - Display (Pixel 3 only)

This is mainly focused to get the base functionality of the board and
being able to use the upstream DTS within Linux and u-boot.

Booting
-------
For older Pixel 3 bootloaders, bootloader-compatible board and MSM IDs are
required for the kernel to boot, so these have been added.

For recent Pixel 3 bootloaders,
a) you want chainloaded proper bootloader (f.e. u-boot),
b) you can also boot kernel when adding back TEXT_OFFSET
   (partial revert of 120dc60d).

This series is a beggining of cleaning up and transitioning support from
sdm845 close to mainline tree to the mainline.

Signed-off-by: David Heidelberg <david@xxxxxxx>
---
David Heidelberg (2):
      Documentation: dt-bindings: arm: qcom: Add Pixel 3 and 3 XL
      arm64: dts: qcom: Add support for Pixel 3 and Pixel 3 XL

 Documentation/devicetree/bindings/arm/qcom.yaml    |   5 +-
 arch/arm64/boot/dts/qcom/Makefile                  |   2 +
 .../arm64/boot/dts/qcom/sdm845-google-blueline.dts | 128 ++++++
 arch/arm64/boot/dts/qcom/sdm845-google-common.dtsi | 467 +++++++++++++++++++++
 .../boot/dts/qcom/sdm845-google-crosshatch.dts     | 137 ++++++
 5 files changed, 736 insertions(+), 3 deletions(-)
---
base-commit: e5f0a698b34ed76002dc5cff3804a61c80233a7a
change-id: 20250419-pixel-3-511edc2a4607

Best regards,
-- 
David Heidelberg <david@xxxxxxx>