Re: [PATCH v2 2/4] iio: adc: Add support for the Renesas RZ/N1 ADC

[Nuno Sá]

On Wed, 2025-10-29 at 15:46 +0100, Herve Codina (Schneider Electric) wrote:
> The Renesas RZ/N1 ADC controller is the ADC controller available in the
> Renesas RZ/N1 SoCs family. It can use up to two internal ADC cores (ADC1
> and ADC2) those internal cores are not directly accessed but are handled
> through ADC controller virtual channels.
> 
> Signed-off-by: Herve Codina (Schneider Electric) <herve.codina@xxxxxxxxxxx>
> ---

Not much to add to Andy's review. Looks in good shape... Just one small remark
from me. With it and Andy's stuff addressed:

Reviewed-by: Nuno Sá <nuno.sa@xxxxxxxxxx>

>  drivers/iio/adc/Kconfig    |  10 +
>  drivers/iio/adc/Makefile   |   1 +
>  drivers/iio/adc/rzn1-adc.c | 493 +++++++++++++++++++++++++++++++++++++
>  3 files changed, 504 insertions(+)
>  create mode 100644 drivers/iio/adc/rzn1-adc.c
> 
> diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
> index 58a14e6833f6..113f6a5c9745 100644
> --- a/drivers/iio/adc/Kconfig
> +++ b/drivers/iio/adc/Kconfig
> @@ -1403,6 +1403,16 @@ config RZG2L_ADC
>  	  To compile this driver as a module, choose M here: the
>  	  module will be called rzg2l_adc.
>  
> +config RZN1_ADC
> +	tristate "Renesas RZ/N1 ADC driver"
> +	depends on ARCH_RZN1 || COMPILE_TEST
> +	help
> +	  Say yes here to build support for the ADC found in Renesas
> +	  RZ/N1 family.
> +
> +	  To compile this driver as a module, choose M here: the
> +	  module will be called rzn1-adc.
> +
>  config SC27XX_ADC
>  	tristate "Spreadtrum SC27xx series PMICs ADC"
>  	depends on MFD_SC27XX_PMIC || COMPILE_TEST
> diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
> index d008f78dc010..ba7a8a63d070 100644
> --- a/drivers/iio/adc/Makefile
> +++ b/drivers/iio/adc/Makefile
> @@ -123,6 +123,7 @@ obj-$(CONFIG_ROHM_BD79112) += rohm-bd79112.o
>  obj-$(CONFIG_ROHM_BD79124) += rohm-bd79124.o
>  obj-$(CONFIG_ROCKCHIP_SARADC) += rockchip_saradc.o
>  obj-$(CONFIG_RZG2L_ADC) += rzg2l_adc.o
> +obj-$(CONFIG_RZN1_ADC) += rzn1-adc.o
>  obj-$(CONFIG_SC27XX_ADC) += sc27xx_adc.o
>  obj-$(CONFIG_SD_ADC_MODULATOR) += sd_adc_modulator.o
>  obj-$(CONFIG_SOPHGO_CV1800B_ADC) += sophgo-cv1800b-adc.o
> diff --git a/drivers/iio/adc/rzn1-adc.c b/drivers/iio/adc/rzn1-adc.c
> new file mode 100644
> index 000000000000..52ec13adddef
> --- /dev/null
> +++ b/drivers/iio/adc/rzn1-adc.c
> @@ -0,0 +1,493 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Renesas RZ/N1 ADC driver
> + *
> + * Copyright (C) 2025 Schneider-Electric
> + *
> + * Author: Herve Codina <herve.codina@xxxxxxxxxxx>
> + *
> + * The RZ/N1 ADC controller can handle channels from its internal ADC1 and/or
> + * ADC2 cores. The driver use ADC1 and/or ADC2 cores depending on the presence
> + * of the related power supplies (AVDD and VREF) description in the device-tree.
> + */

...

> 
> +
> +	platform_set_drvdata(pdev, indio_dev);
> +

If I'm not missing nothing, there's no real need to pass in indio_dev. So, why not
passing rzn1_adc directly and avoid the pointer arithmetic's in the pm callbacks?

- Nuno Sá