[PATCH v2] arm64: dts: freescale: imx8mp-tqma8mpql-mba8mp-ras314: fix UART1 RTS/CTS muxing

[Nora Schiffer]

UART1 operates in DCE mode, but the RTS/CTS pins were incorrectly
configured using the DTE pinmux setting.

Correct the pinmux to match DCE mode. Switching the RTS and CTS signals
is fine for this board, as UART1 is routed to a pin header. Existing
functionality is unaffected, as RTS/CTS could never have worked with
the incorrect pinmux.

Fixes: ddabb3ce3f90 ("arm64: dts: freescale: add TQMa8MPQL on MBa8MP-RAS314")
Signed-off-by: Nora Schiffer <nora.schiffer@xxxxxxxxxxxxxxx>
---

v2: updated commit message based on suggestion by Frank Li


 .../boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314.dts     | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314.dts
index b7f69c92b7748..1665a5030b993 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314.dts
@@ -848,8 +848,8 @@ pinctrl_tlv320aic3x04: tlv320aic3x04grp {
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <MX8MP_IOMUXC_SAI2_RXFS__UART1_DCE_TX	0x14>,
 			   <MX8MP_IOMUXC_SAI2_RXC__UART1_DCE_RX		0x14>,
-			   <MX8MP_IOMUXC_SAI2_RXD0__UART1_DTE_CTS	0x14>,
-			   <MX8MP_IOMUXC_SAI2_TXFS__UART1_DTE_RTS	0x14>;
+			   <MX8MP_IOMUXC_SAI2_RXD0__UART1_DCE_RTS	0x14>,
+			   <MX8MP_IOMUXC_SAI2_TXFS__UART1_DCE_CTS	0x14>;
 	};
 
 	pinctrl_uart1_gpio: uart1gpiogrp {
-- 
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
https://www.tq-group.com/