Re: [EXTERNAL] Re: [PATCH v1 2/2] ASoC: tas2781: Add tas5832 support

[Krzysztof Kozlowski]

On 02/03/2026 10:22, Xu, Baojun wrote:
>>
>> ________________________________________
>> From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
>> Sent: 02 March 2026 16:58
>> To: Xu, Baojun
>> Cc: broonie@xxxxxxxxxx; tiwai@xxxxxxx; andriy.shevchenko@xxxxxxxxxxxxxxx; 13916275206@xxxxxxx; Ding, Shenghao; linux-sound@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; lgirdwood@xxxxxxxxx; robh@xxxxxxxxxx; krzk+dt@xxxxxxxxxx; conor+dt@xxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; Yi, Ken; Lo, Henry; Chen, Robin; Wang, Will; jim.shil@xxxxxxxxxxx; toastcheng@xxxxxxxxxx; chinkaiting@xxxxxxxxxx
>> Subject: Re: [EXTERNAL] Re: [PATCH v1 2/2] ASoC: tas2781: Add tas5832 support
>>
>> On 02/03/2026 09:24, Xu, Baojun wrote:
>>>>>>
>>>>>>>  MODULE_DEVICE_TABLE(i2c, tasdevice_id);
>>>>>>> @@ -144,6 +145,7 @@ static const struct of_device_id tasdevice_of_match[] = {
>>>>>>>       { .compatible = "ti,tas5827" },
>>>>>>>       { .compatible = "ti,tas5828" },
>>>>>>>       { .compatible = "ti,tas5830" },
>>>>>>> +     { .compatible = "ti,tas5832" },
>>>>>>
>>>>>> So it is fully compatible with tas5830 and most of the changes here are
>>>>>> not needed?
>>>>>
>>>>> Yes, it's fully compatible with tas5827/28/30.
>>>>
>>>> Then above hunk and many others are not needed.
>>>
>>> Hi, because those chips have different on the voltage, so the parameters
>>> is different, have to use different firmware binary, so we must identify
>>> every chip in the driver.
>>
>> That would explain other ID tables (and should be briefly mentioned in
>> the commit msg), but not this one, because here you do not customize the
>> binary at all.
>>
> 
> Hi, we save the chip_id in the dev_name:
> strscpy(tas_priv->dev_name, tasdevice_id[tas_priv->chip_id].name,
> 	sizeof(tas_priv->dev_name));

And where do you see the name in above table?


> 
> And get firmware binary from this dev_name:
> scnprintf(tas_priv->rca_binaryname, 64, "%sRCA%d.bin",
> 	tas_priv->dev_name, tas_priv->ndev);

Or here?

> 
>> Best regards,
>> Krzysztof
>>
>>
>>
> Best Regards
> Jim
> 


Best regards,
Krzysztof