[PATCH v2 9/9] arm64: tegra: Add iommu-map and enable GPCDMA in Tegra264
From: Akhil R
Date: Mon Mar 02 2026 - 07:39:14 EST
Add iommu-map the GPCDMA controller node so that each channel uses a
separate stream ID and gets its own IOMMU domain for memory. Enable
GCPDMA as well.
Also remove the fallback compatible string "nvidia,tegra186-gpcdma".
Tegra186 compatible cannot work on Tegra264 because of the register
offset changes and absence of reset property.
Signed-off-by: Akhil R <akhilrajeev@xxxxxxxxxx>
---
arch/arm64/boot/dts/nvidia/tegra264-p3834.dtsi | 4 ++++
arch/arm64/boot/dts/nvidia/tegra264.dtsi | 3 ++-
2 files changed, 6 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/nvidia/tegra264-p3834.dtsi b/arch/arm64/boot/dts/nvidia/tegra264-p3834.dtsi
index 7e2c3e66c2ab..c8beb616964a 100644
--- a/arch/arm64/boot/dts/nvidia/tegra264-p3834.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra264-p3834.dtsi
@@ -16,6 +16,10 @@ serial@c4e0000 {
serial@c5a0000 {
status = "okay";
};
+
+ dma-controller@8400000 {
+ status = "okay";
+ };
};
bus@8100000000 {
diff --git a/arch/arm64/boot/dts/nvidia/tegra264.dtsi b/arch/arm64/boot/dts/nvidia/tegra264.dtsi
index 7644a41d5f72..9821d085c766 100644
--- a/arch/arm64/boot/dts/nvidia/tegra264.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra264.dtsi
@@ -3208,7 +3208,7 @@ agic_page5: interrupt-controller@99b0000 {
};
gpcdma: dma-controller@8400000 {
- compatible = "nvidia,tegra264-gpcdma", "nvidia,tegra186-gpcdma";
+ compatible = "nvidia,tegra264-gpcdma";
reg = <0x0 0x08400000 0x0 0x210000>;
interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>,
@@ -3244,6 +3244,7 @@ gpcdma: dma-controller@8400000 {
<GIC_SPI 615 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
iommus = <&smmu1 0x00000800>;
+ iommu-map = <1 &smmu1 0x801 31>;
dma-coherent;
dma-channel-mask = <0xfffffffe>;
status = "disabled";
--
2.50.1