Re: [PATCH] arm64: dts: marvell: uDPU: add ethernet aliases

[Gregory CLEMENT]

Robert Marko <robert.marko@xxxxxxxxxx> writes:

> On eDPU plus, which is an updated revision of eDPU which uses an external
> MV88E6361 switch we are relying on U-Boot to detect the board, and then
> enable and disable the required nodes for that revision.
>
> However, it seems that I missed adding the required aliases for ethernet
> controllers, and this worked as in OpenWrt we had added those locally.
>
> Cc: stable@xxxxxxxxxxxxxxx
> Fixes: 660b8b2f3944 ("arm64: dts: marvell: eDPU: add support for version with external switch")
> Signed-off-by: Robert Marko <robert.marko@xxxxxxxxxx>

Applied on mvebu/dt64

Thanks,

Gregory
> ---
>  arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi | 5 +++++
>  1 file changed, 5 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi
> index 242820845707..cd856c0aba71 100644
> --- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi
> @@ -15,6 +15,11 @@
>  #include "armada-372x.dtsi"
>  
>  / {
> +	aliases {
> +		ethernet0 = &eth0;
> +		ethernet1 = &eth1;
> +	};
> +
>  	chosen {
>  		stdout-path = "serial0:115200n8";
>  	};
> -- 
> 2.52.0
>

-- 
Grégory CLEMENT, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com