Re: [PATCH V2 0/2] arm64: dts: imx8mp-evk: Add usdhc1 for SDIO WiFi support

[Frank Li]

On Thu, 05 Feb 2026 15:34:52 +0800, Sherry Sun wrote:
> This patch set adds usdhc1 support to enable M.2 SDIO WiFi on the
> i.MX8MP EVK. The M.2 connector on this board can operate in both PCIe
> and SDIO modes, and SDIO-based WLAN modules require proper power control
> through the same M.2 WLAN enable line (W_DISABLE1 on pin 56).
> 
> Patch 1 corrects the IOMUX configuration by enabling the pull-select bit
> for the M.2 regulator GPIO, ensuring that the weak pull-up is actually
> applied.
> Patch 2 enables usdhc1 and associated pinctrl settings needed for SDIO
> WiFi operation on the M.2 connector.
> 
> [...]

Applied, thanks!

[1/2] arm64: dts: imx8mp-evk: Enable pull select bit for PCIe regulator GPIO (M.2 W_DISABLE1)
      (no commit info)
[2/2] arm64: dts: imx8mp-evk: Add usdhc1 for SDIO WiFi support
      (no commit info)

Best regards,
--
Frank Li <Frank.Li@xxxxxxx>