[PATCH 08/14] ARM: dts: imx6ul-var-som: factor out SD card support
From: Hugo Villeneuve
Date: Mon Mar 02 2026 - 14:12:48 EST
From: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx>
Move SD support to a separate include, since it cannot be used at the
same time as the Wifi/BT module.
Signed-off-by: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx>
---
.../dts/nxp/imx/imx6ul-var-som-common.dtsi | 33 ++++++++++++
.../imx/imx6ul-var-som-concerto-common.dtsi | 51 -------------------
.../dts/nxp/imx/imx6ul-var-som-concerto.dts | 1 +
.../boot/dts/nxp/imx/imx6ul-var-som-sd.dtsi | 27 ++++++++++
.../dts/nxp/imx/imx6ull-var-som-concerto.dts | 1 +
5 files changed, 62 insertions(+), 51 deletions(-)
create mode 100644 arch/arm/boot/dts/nxp/imx/imx6ul-var-som-sd.dtsi
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-common.dtsi
index 22b0c4e0725a5..dd4ecff1eb786 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-common.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-common.dtsi
@@ -139,6 +139,39 @@ MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS 0x1b0b1
>;
};
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x17059
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
+ >;
+ };
+
+ pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
+ >;
+ };
+
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x10069
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-concerto-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-concerto-common.dtsi
index 10a23ae104359..ea8d9905ce6e7 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-concerto-common.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-concerto-common.dtsi
@@ -186,45 +186,6 @@ MX6UL_PAD_UART3_TX_DATA__ANATOP_OTG1_ID 0x17059
>;
};
- pinctrl_usdhc1: usdhc1grp {
- fsl,pins = <
- MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
- MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x17059
- MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
- MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
- MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
- MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
- >;
- };
-
- pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
- fsl,pins = <
- MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9
- MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9
- MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
- MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
- MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
- MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9
- >;
- };
-
- pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
- fsl,pins = <
- MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9
- MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9
- MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9
- MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9
- MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9
- MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
- >;
- };
-
- pinctrl_usdhc1_gpio: usdhc1-gpiogrp {
- fsl,pins = <
- MX6UL_PAD_GPIO1_IO00__GPIO1_IO00 0x1b0b1 /* CD */
- >;
- };
-
pinctrl_wdog: wdoggrp {
fsl,pins = <
MX6UL_PAD_GPIO1_IO01__WDOG1_WDOG_B 0x78b0
@@ -286,18 +247,6 @@ &usbotg2 {
status = "okay";
};
-&usdhc1 {
- pinctrl-names = "default", "state_100mhz", "state_200mhz";
- pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
- pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_usdhc1_gpio>;
- pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>;
- cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
- no-1-8-v;
- keep-power-in-suspend;
- wakeup-source;
- status = "okay";
-};
-
&wdog1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wdog>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-concerto.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-concerto.dts
index 11b45f105b7ad..85ebac30d7bed 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-concerto.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-concerto.dts
@@ -11,6 +11,7 @@
#include "imx6ul-var-som.dtsi"
#include "imx6ul-var-som-concerto-common.dtsi"
+#include "imx6ul-var-som-sd.dtsi"
/ {
model = "Variscite VAR-SOM-6UL Concerto Board (6UL CPU)";
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-sd.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-sd.dtsi
new file mode 100644
index 0000000000000..0e6d9b945eb4a
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-sd.dtsi
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Support optional SD card interface on Variscite VAR-SOM-6UL module.
+ *
+ * Copyright 2019-2024 Variscite Ltd.
+ * Copyright 2026 Dimonoff
+ */
+
+&iomuxc {
+ pinctrl_usdhc1_gpio: usdhc1-gpiogrp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO00__GPIO1_IO00 0x1b0b1 /* CD */
+ >;
+ };
+};
+
+&usdhc1 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_usdhc1_gpio>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>;
+ cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+ no-1-8-v;
+ keep-power-in-suspend;
+ wakeup-source;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-var-som-concerto.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-var-som-concerto.dts
index 7c601af2657d7..ebf88c3e1addc 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ull-var-som-concerto.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-var-som-concerto.dts
@@ -10,6 +10,7 @@
#include "imx6ull-var-som.dtsi"
#include "imx6ul-var-som-concerto-common.dtsi"
+#include "imx6ul-var-som-sd.dtsi"
/ {
model = "Variscite VAR-SOM-6UL Concerto Board (6ULL CPU)";
--
2.47.3