Re: [PATCH v10 1/3] dt-bindings: soc: imx93-media-blk-ctrl: Add PDFC subnode to schema and example

[Liu Ying]

On Mon, Mar 02, 2026 at 05:10:40PM +0100, Marco Felsch wrote:
> From: Liu Ying <victor.liu@xxxxxxx>
> 
> i.MX93 SoC mediamix blk-ctrl contains one DISPLAY_MUX register which
> configures parallel display format by using the "PARALLEL_DISP_FORMAT"
> field. Document the Parallel Display Format Configuration(PDFC) subnode
> and add the subnode to example.
> 
> Reviewed-by: Rob Herring (Arm) <robh@xxxxxxxxxx>
> Signed-off-by: Liu Ying <victor.liu@xxxxxxx>
> [m.felsch@xxxxxxxxxxxxxx: port to v7.0-rc1]
> [m.felsch@xxxxxxxxxxxxxx: add bus-width]
> Signed-off-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
> ---
>  .../bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml | 78 ++++++++++++++++++++++
>  1 file changed, 78 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml
> index 34aea58094e55365a2f9c86092f637e533f954ff..d828c2e82965c7a4cd69a67136047d83c96b0a35 100644
> --- a/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml
> +++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml
> @@ -40,6 +40,58 @@ properties:
>      minItems: 8
>      maxItems: 10
>  
> +  dpi-bridge:

Cc'ing Frank.

fsl,ldb.yaml documents fsl,imx6sx-ldb, fsl,imx8mp-ldb and fsl,imx93-ldb
with a reg property.  Since all of them are child devices of either GPR
or BLK_CTRL and this dpi-bridge is a child device of BLK_CTRL without a
reg property, how can we handle the inconsistency?  At least, with this
patch and the current fsl,ldb.yaml, we cannot add an i.MX93 LDB child
node.

> +    type: object
> +    additionalProperties: false
> +
> +    properties:
> +      compatible:
> +        enum:
> +          - nxp,imx91-pdfc
> +          - nxp,imx93-pdfc
> +
> +      ports:
> +        $ref: /schemas/graph.yaml#/properties/ports
> +
> +        properties:
> +          port@0:
> +            $ref: /schemas/graph.yaml#/properties/port
> +            description: Input port node to receive pixel data.
> +
> +          port@1:
> +            $ref: /schemas/graph.yaml#/$defs/port-base
> +            unevaluatedProperties: false
> +            description: Output port node to downstream pixel data receivers.
> +
> +            properties:
> +              endpoint:
> +                $ref: /schemas/media/video-interfaces.yaml#
> +                unevaluatedProperties: false
> +
> +                properties:
> +                  bus-width:
> +                    enum: [ 16, 18, 24 ]
> +                    description:
> +                      Specify the physical parallel bus width.
> +
> +                      This property is optional if the display bus-width
> +                      matches the SoC bus-width, e.g. a 18-bit RGB666 (display)
> +                      is connected and all 18-bit data lines are muxed to the
> +                      parallel-output pads.
> +
> +                      This property must be set to 18 to cut only the LSBs
> +                      instead of the MSBs in case a 24-bit RGB888 display is
> +                      connected and only the lower 18-bit data lanes are muxed
> +                      to the parallel-output pads.
> +
> +        required:
> +          - port@0
> +          - port@1
> +
> +    required:
> +      - compatible
> +      - ports
> +
>  allOf:
>    - if:
>        properties:
> @@ -112,4 +164,30 @@ examples:
>                 clock-names = "apb", "axi", "nic", "disp", "cam",
>                               "pxp", "lcdif", "isi", "csi", "dsi";
>        #power-domain-cells = <1>;
> +
> +      dpi-bridge {
> +        compatible = "nxp,imx93-pdfc";
> +
> +        ports {
> +          #address-cells = <1>;
> +          #size-cells = <0>;
> +
> +          port@0 {
> +            reg = <0>;
> +
> +            pdfc_from_lcdif: endpoint {
> +              remote-endpoint = <&lcdif_to_pdfc>;
> +            };
> +          };
> +
> +          port@1 {
> +            reg = <1>;
> +
> +            pdfc_to_panel: endpoint {
> +              remote-endpoint = <&panel_from_pdfc>;
> +              bus-width = <18>;
> +            };
> +          };
> +        };
> +      };
>      };
> 

-- 
Regards,
Liu Ying