Re: [PATCH v4] dt-bindings: display: msm: Fix reg ranges and clocks on Glymur

[Johan Hovold]

On Tue, Mar 03, 2026 at 11:03:11AM +0200, Abel Vesa wrote:
> The Glymur platform has four DisplayPort controllers. The hardware
> supports four streams (MST) per controller. However, on Glymur the first
> three controllers only have two streams wired to the display subsystem,
> while the fourth controller operates in single-stream mode.
> 
> Add a dedicated clause for the Glymur compatible to require the register
> ranges for all four stream blocks, while allowing either one pixel clock
> (for the single-stream controller) or two pixel clocks (for the remaining
> controllers).
> 
> Update the Glymur MDSS schema example by adding the missing p2, p3,
> mst2link and mst3link register blocks. Without these, the bindings
> validation fails. Also replace the made-up register addresses with the
> actual addresses from the first controller to match the SoC devicetree
> description.
> 
> Cc: stable@xxxxxxxxxxxxxxx # v6.19

No need to backport this, it's essentially just a documentation fix (not
a bug fix).

> Fixes: 8f63bf908213 ("dt-bindings: display: msm: Document the Glymur DiplayPort controller")
> Fixes: 1aee577bbc60 ("dt-bindings: display: msm: Document the Glymur Mobile Display SubSystem")
> Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxxxxxxxx>

Johan