[PATCH net-next 1/2] dt-bindings: net: sff,sfp: Describe power supply pins

[Romain Gantois]

SFP cages and soldered-on SFF transceivers have two separate power supply
pins: one for the transmitter circuit, and one for the receiver circuit.

Describe these two pins and the regulators supplying them.

Signed-off-by: Romain Gantois <romain.gantois@xxxxxxxxxxx>
---
 Documentation/devicetree/bindings/net/sff,sfp.yaml | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/sff,sfp.yaml b/Documentation/devicetree/bindings/net/sff,sfp.yaml
index 15616ad737f57..95729cf694a7d 100644
--- a/Documentation/devicetree/bindings/net/sff,sfp.yaml
+++ b/Documentation/devicetree/bindings/net/sff,sfp.yaml
@@ -68,6 +68,14 @@ properties:
       output gpio signal (SFP+ only), low - low Tx rate, high - high Tx rate. Must
       not be present for SFF modules
 
+  vccr-supply:
+    description:
+      Phandle to a regulator supplying the receiver power (AKA VccR) pin.
+
+  vcct-supply:
+    description:
+      Phandle to a regulator supplying the transmitter power (AKA VccT) pin.
+
 allOf:
   - if:
       properties:

-- 
2.52.0