Re: [PATCH v2 1/6] dt-bindings: mfd: add NXP MC33978/MC34978 MSDI

[Krzysztof Kozlowski]

On 04/03/2026 11:25, David Jander wrote:
> On Wed, 4 Mar 2026 10:49:06 +0100
> Krzysztof Kozlowski <krzk@xxxxxxxxxx> wrote:
> 
>> On 04/03/2026 10:06, David Jander wrote:
>>>
>>> Hi Krzysztof,
>>>
>>> On Wed, 4 Mar 2026 09:05:11 +0100
>>> Krzysztof Kozlowski <krzk@xxxxxxxxxx> wrote:
>>>   
>>>> On Tue, Mar 03, 2026 at 05:10:20PM +0100, Oleksij Rempel wrote:  
>>>>> Hi Krzysztof and Rob,
>>>>>
>>>>> On Tue, Mar 03, 2026 at 08:40:55AM -0600, Rob Herring (Arm) wrote:    
>>>>>>>  .../devicetree/bindings/mfd/nxp,mc33978.yaml  | 114 ++++++++++++++++++
>>>>>>>  .../bindings/pinctrl/nxp,mc33978-pinctrl.yaml |  82 +++++++++++++
>>>>>>>  2 files changed, 196 insertions(+)
>>>>>>>  create mode 100644 Documentation/devicetree/bindings/mfd/nxp,mc33978.yaml
>>>>>>>  create mode 100644 Documentation/devicetree/bindings/pinctrl/nxp,mc33978-pinctrl.yaml
>>>>>>>     
>>>>>>
>>>>>> My bot found errors running 'make dt_binding_check' on your patch:
>>>>>>
>>>>>> yamllint warnings/errors:
>>>>>>
>>>>>> dtschema/dtc warnings/errors:
>>>>>> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/mfd/nxp,mc33978.example.dtb: gpio@0 (nxp,mc33978): $nodename:0: 'gpio@0' does not match '^mux-controller(@.*|-([0-9]|[1-9][0-9]+))?$'
>>>>>> 	from schema $id: http://devicetree.org/schemas/mux/mux-controller.yaml
>>>>>>     
>>>>>
>>>>> Folding the mux node into the parent as suggested [1] causes this error.
>>>>> Because the parent now has #mux-control-cells, the generic
>>>>> mux-controller.yaml forces the node name to be mux-controller. Since
>>>>> this chip is primarily a switch/GPIO controller, naming the parent SPI
>>>>> node mux-controller@0 is misleading.
>>>>>
>>>>> What is the preferred way to go here?    
>>>>
>>>> https://www.nxp.com/products/interfaces/multi-switch-detection-interface/22-i-o-msdi-programmable-current-analog-mux:MC33978
>>>>
>>>> Name of the mc33978 device is "programmable analog mux" and further
>>>> description says "analog multiplexer for reading analog inputs ", so I
>>>> don't find "mux-controller" a confusing name. It is EXACTLY a
>>>> mux, so mux-controller.  
>>>
>>> Sorry to chime in here. I'm afraid the NXP description on that link you posted
>>> is a typo. It is not correct. This chip is primarily a "Switch Detection
>>> Interface", or in other wordt a switch input interface. Wee here for the same
>>> page for the MC34978, which is the exact same chip:
>>>
>>> https://www.nxp.com/products/interfaces/multi-switch-detection-interface/switch-detection-interface-22-i-os-programmable-wetting-current-temp-sensor-3-3-v-5-0-v-spi:MC34978  
>>
>> That's MC34978 and I commented on MC33978.
>>
>> What is the primary function of MC33978 being described here as the base?
> 
> The MC34978 and MC33978 are the exact same part (except for the temperature
> range). The fact that NXP has two different web-pages with two different
> descriptions of it certainly doesn't help, but you can also check the
> datasheet[1] description: "MC33978: 22-channel multiple switch detection
> interface with programmable wetting current"
> 
> Further down in the description it says: "It also features a 24-to-1 analog
> multiplexer for reading inputs as analog."
> IMHO this makes it clear that this is NOT primarily a MUX.
> 
> Actually, I doubt many users of this chip will use the analog MUX function at
> all since it has quite a few limitations that make it not very practical to
> use.
> 
> The most fitting Linux framework for this chip's primary funtcion IMHO is
> pinctrl/gpio, but there are some caveats unfortunately.
> 
> [1] https://www.nxp.com/docs/en/data-sheet/MC33978.pdf

OK, thanks for the explanation, but then primary function is not GPIO
either, because nothing on linked page says it is a generic purpose IO.
It says it is switch detection. Maybe better generic name is then
"pinctrl", thus also "pinctrl" child should be folded into the parent...
but switch detection is also not a pinctrl. :/

Best regards,
Krzysztof