[PATCH 1/7] arm64: dts: amlogic: s6: Drop CPU masks from GICv3 PPI interrupts
From: Geert Uytterhoeven
Date: Wed Mar 04 2026 - 12:13:56 EST
Unlike older GIC variants, the GICv3 DT bindings do not support
specifying a CPU mask in PPI interrupt specifiers. Drop the masks.
While at it, replace the magic number for IRQ_TYPE_LEVEL_HIGH by its
symbolic definition.
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
arch/arm64/boot/dts/amlogic/amlogic-s6.dtsi | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-s6.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-s6.dtsi
index 8ef6319390331fcf..ab3acef2b147e62c 100644
--- a/arch/arm64/boot/dts/amlogic/amlogic-s6.dtsi
+++ b/arch/arm64/boot/dts/amlogic/amlogic-s6.dtsi
@@ -53,10 +53,10 @@ pwrc: power-controller {
timer {
compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
};
psci {
@@ -84,7 +84,7 @@ gic: interrupt-controller@ff200000 {
interrupt-controller;
reg = <0x0 0xff200000 0 0x10000>,
<0x0 0xff240000 0 0x80000>;
- interrupts = <GIC_PPI 9 0xf04>;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
};
apb: bus@fe000000 {
--
2.43.0