Re: [PATCH v3 2/3] vfio/ism: Implement vfio_pci driver for ISM devices

[Niklas Schnelle]

On Thu, 2026-03-05 at 13:20 +0100, Julian Ruess wrote:
> Add a vfio_pci variant driver for the s390-specific Internal Shared
> Memory (ISM) devices used for inter-VM communication.
> 
> This enables the development of vfio-pci-based user space drivers for
> ISM devices.
> 
> On s390, kernel primitives such as ioread() and iowrite() are switched
> over from function handle based PCI load/stores instructions to PCI
> memory-I/O (MIO) loads/stores when these are available and not
> explicitly disabled. Since these instructions cannot be used with ISM
> devices, ensure that classic function handle-based PCI instructions are
> used instead.
> 
> The driver is still required even when MIO instructions are disabled, as
> the ISM device relies on the PCI store block (PCISTB) instruction to
> perform write operations.
> 
> Stores are not fragmented, therefore one ioctl corresponds to exactly
> one PCISTB instruction. User space must ensure to not write more than
> 4096 bytes at once to an ISM BAR which is the maximum payload of the
> PCISTB instruction.
> 
> Reviewed-by: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
> Signed-off-by: Julian Ruess <julianr@xxxxxxxxxxxxx>
> ---

Just to make it explicit, my R-b stands based on having talked through
the changes since v2 with Julian off list.

Thanks,
Niklas