[PATCH v2 2/2] arm64: dts: tqma9352-mba91xxca: Change Ethernet PHY IRQ to IRQ_TYPE_LEVEL_LOW
From: Alexander Stein
Date: Thu Mar 05 2026 - 11:46:52 EST
Ethernet PHY interrupt mode is level triggered. Adjust the mode
accordingly.
Signed-off-by: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
---
Changes in v2:
* Adjusted the subject
arch/arm64/boot/dts/freescale/imx93-tqma9352-mba91xxca.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba91xxca.dts b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba91xxca.dts
index 2673d9dccbf4b..737326ba1b2a7 100644
--- a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba91xxca.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba91xxca.dts
@@ -232,7 +232,7 @@ ethphy_eqos: ethernet-phy@0 {
reset-assert-us = <500000>;
reset-deassert-us = <50000>;
interrupt-parent = <&gpio3>;
- interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+ interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
enet-phy-lane-no-swap;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
@@ -265,7 +265,7 @@ ethphy_fec: ethernet-phy@0 {
reset-assert-us = <500000>;
reset-deassert-us = <50000>;
interrupt-parent = <&gpio3>;
- interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+ interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
enet-phy-lane-no-swap;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
--
2.43.0