[PATCH v3 2/3] remoteproc: qcom_wcnss_iris: Add support for WCN3610

[Kerigan Creighton]

WCN3610 has the same regulator requirements as
WCN3620, so in qcom_wcnss_iris, we can use wcn3620_data.

A separate compatible is needed for WCN3610 because the
wcn36xx driver uses it for chip-specific configuration.
Specifically, it sets BTC (Bluetooth Coexistence) CFGs,
disables ENABLE_DYNAMIC_RA_START_RATE, and disables
STA_POWERSAVE for this specific chip for stable
functionality.

Signed-off-by: Kerigan Creighton <kerigancreighton@xxxxxxxxx>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxxxxxxxx>
---
Changes in v2:
 - Move remoteproc compatible string addition to the middle of
   the patch set.
 - Add Reviewed-by Dmitry (thanks!)

Changes in v3:
 - Describe why we need a new compatible in the remoteproc
   patch [Krzysztof].
---
 drivers/remoteproc/qcom_wcnss_iris.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/remoteproc/qcom_wcnss_iris.c b/drivers/remoteproc/qcom_wcnss_iris.c
index 2b89b4db6c..e58b59355f 100644
--- a/drivers/remoteproc/qcom_wcnss_iris.c
+++ b/drivers/remoteproc/qcom_wcnss_iris.c
@@ -95,6 +95,7 @@ void qcom_iris_disable(struct qcom_iris *iris)
 }
 
 static const struct of_device_id iris_of_match[] = {
+	{ .compatible = "qcom,wcn3610", .data = &wcn3620_data },
 	{ .compatible = "qcom,wcn3620", .data = &wcn3620_data },
 	{ .compatible = "qcom,wcn3660", .data = &wcn3660_data },
 	{ .compatible = "qcom,wcn3660b", .data = &wcn3680_data },
-- 
2.53.0