Re: [PATCH v3 3/3] arm64: dts: rockchip: Add Orange Pi 5 Pro board support

[Jimmy Hon]

On Thu, Mar 5, 2026 at 8:46 PM <dennis@xxxxxxxx> wrote:
>
> From: Dennis Gilmore <dennis@xxxxxxxx>
>
> Add device tree for the Xunlong Orange Pi 5 Pro (RK3588S).
>
> - eMMC module, you can optionally solder a SPI NOR in place and turn
>  off the eMMC
> - PCIe-attached NIC (pcie2x1l1)
> - PCIe NVMe slot (pcie2x1l2)
> - AP6256 WiFi (BCM43456) via SDIO with mmc-pwrseq
> - BCM4345C5 Bluetooth
> - es8388 audio
> - USB 2.0 and USB 3.0
>
> Vendors description and links to schematics available:
> http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-5-Pro.html
>
> Signed-off-by: Dennis Gilmore <dennis@xxxxxxxx>
> ---
>  arch/arm64/boot/dts/rockchip/Makefile         |   1 +
>  .../dts/rockchip/rk3588s-orangepi-5-pro.dts   | 311 ++++++++++++++++++
>  2 files changed, 312 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5-pro.dts
>
> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> index 4d384f153c13..c99dca2ae9e7 100644
> --- a/arch/arm64/boot/dts/rockchip/Makefile
> +++ b/arch/arm64/boot/dts/rockchip/Makefile
> @@ -214,6 +214,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-nanopi-r6c.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-odroid-m2.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5b.dtb
> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5-pro.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-cm5-base.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-radxa-cm5-io.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-roc-pc.dtb
> diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5-pro.dts b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5-pro.dts
> new file mode 100644
> index 000000000000..d848891e09be
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5-pro.dts
> @@ -0,0 +1,311 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +
> +/dts-v1/;
> +
> +#include "rk3588s-orangepi-5.dtsi"
> +
> +/ {
> +       model = "Xunlong Orange Pi 5 Pro";
> +       compatible = "xunlong,orangepi-5-pro", "rockchip,rk3588s";
> +
> +       aliases {
> +               mmc0 = &sdhci;
> +               mmc1 = &sdmmc;
> +               mmc2 = &sdio;
> +       };
> +
> +       analog-sound {
> +               compatible = "simple-audio-card";
> +               pinctrl-names = "default";
> +               pinctrl-0 = <&hp_detect>;
> +               simple-audio-card,bitclock-master = <&masterdai>;
> +               simple-audio-card,format = "i2s";
> +               simple-audio-card,frame-master = <&masterdai>;
> +               simple-audio-card,hp-det-gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
> +               simple-audio-card,mclk-fs = <256>;
> +               simple-audio-card,name = "rockchip,es8388";
> +               simple-audio-card,routing =
> +                       "Headphones", "LOUT1",
> +                       "Headphones", "ROUT1",
> +                       "LINPUT1", "Microphone Jack",
> +                       "RINPUT1", "Microphone Jack",
> +                       "LINPUT2", "Onboard Microphone",
> +                       "RINPUT2", "Onboard Microphone";
> +               simple-audio-card,widgets =
> +                       "Microphone", "Microphone Jack",
> +                       "Microphone", "Onboard Microphone",
> +                       "Headphone", "Headphones";
> +
> +               simple-audio-card,cpu {
> +                       sound-dai = <&i2s2_2ch>;
> +               };
> +
> +               masterdai: simple-audio-card,codec {
> +                       sound-dai = <&es8388>;
> +                       system-clock-frequency = <12288000>;
> +               };
> +       };
> +
> +       pwm-leds {
> +               compatible = "pwm-leds";
> +
> +               led-0 {
> +                       color = <LED_COLOR_ID_BLUE>;
> +                       function = LED_FUNCTION_STATUS;
> +                       linux,default-trigger = "heartbeat";
> +                       max-brightness = <255>;
> +                       pwms = <&pwm15 0 1000000 0>;
> +               };
> +
> +               led-1 {
> +                       color = <LED_COLOR_ID_GREEN>;
> +                       function = LED_FUNCTION_ACTIVITY;
> +                       linux,default-trigger = "heartbeat";
> +                       max-brightness = <255>;
> +                       pwms = <&pwm3 0 1000000 0>;
> +               };
> +       };
> +
> +       fan: pwm-fan {
> +               compatible = "pwm-fan";
> +               #cooling-cells = <2>;
> +               cooling-levels = <0 50 100 150 200 255>;
> +               fan-supply = <&vcc5v0_sys>;
> +               pwms = <&pwm2 0 20000000 0>;
> +       };
> +
> +       vcc3v3_pcie_m2: regulator-vcc3v3-pcie-m2 {
> +               compatible = "regulator-fixed";
> +               regulator-always-on;
> +               regulator-boot-on;
> +               regulator-max-microvolt = <3300000>;
> +               regulator-min-microvolt = <3300000>;
> +               regulator-name = "vcc3v3_pcie_m2";
> +               vin-supply = <&vcc5v0_sys>;
> +       };
> +
> +       vcc3v3_pcie20: regulator-vcc3v3-pcie20 {
> +               compatible = "regulator-fixed";
> +               enable-active-high;
> +               gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>;
> +               regulator-boot-on;
> +               regulator-max-microvolt = <3300000>;
> +               regulator-min-microvolt = <3300000>;
> +               regulator-name = "vcc3v3_pcie20";
Is this vcc3v3_phy1 in the schematic?

> +               startup-delay-us = <50000>;
> +               vin-supply = <&vcc5v0_sys>;
according to the schematic, this is fed by vcc_3v3_s3
> +       };
> +
> +       vcc5v0_otg: regulator-vcc5v0-otg {
> +               compatible = "regulator-fixed";
> +               enable-active-high;
> +               gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
> +               pinctrl-names = "default";
> +               pinctrl-0 = <&vcc5v0_otg_en>;
> +               regulator-always-on;
> +               regulator-boot-on;
> +               regulator-max-microvolt = <5000000>;
> +               regulator-min-microvolt = <5000000>;
> +               regulator-name = "vcc5v0_otg";
> +               vin-supply = <&vcc5v0_sys>;
> +       };
> +
> +       sdio_pwrseq: sdio-pwrseq {
> +               compatible = "mmc-pwrseq-simple";
> +               clocks = <&hym8563>;
> +               clock-names = "ext_clock";
> +               post-power-on-delay-ms = <200>;
> +               reset-gpios = <&gpio0 RK_PD0 GPIO_ACTIVE_LOW>;
> +       };
> +};
> +
> +&i2c1 {
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&i2c1m4_xfer>;
> +       status = "okay";
> +};
> +
> +&i2c3 {
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&i2c3m0_xfer>;
> +       status = "okay";
> +
> +       es8388: audio-codec@11 {
> +               compatible = "everest,es8388", "everest,es8328";
> +               reg = <0x11>;
> +               #sound-dai-cells = <0>;
> +               AVDD-supply = <&vcc_3v3_s0>;
> +               DVDD-supply = <&vcc_1v8_s0>;
> +               HPVDD-supply = <&vcc_3v3_s0>;
> +               PVDD-supply = <&vcc_3v3_s0>;
> +               assigned-clock-rates = <12288000>;
> +               assigned-clocks = <&cru I2S2_2CH_MCLKOUT>;
> +               clocks = <&cru I2S2_2CH_MCLKOUT>;
> +       };
> +};
> +
> +&i2c4 {
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&i2c4m3_xfer>;
> +       status = "okay";
> +};
> +
> +&i2s2_2ch {
> +       pinctrl-0 = <&i2s2m1_lrck &i2s2m1_mclk &i2s2m1_sclk
> +                    &i2s2m1_sdi &i2s2m1_sdo>;
> +       status = "okay";
> +};
> +
> +&package_thermal {
> +       polling-delay = <1000>;
> +
> +       cooling-maps {
> +               map0 {
> +                       trip = <&package_fan0>;
> +                       cooling-device = <&fan THERMAL_NO_LIMIT 1>;
> +               };
> +
> +               map1 {
> +                       trip = <&package_fan1>;
> +                       cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
> +               };
> +       };
> +
> +       trips {
> +               package_fan0: package-fan0 {
> +                       hysteresis = <2000>;
> +                       temperature = <55000>;
> +                       type = "active";
> +               };
> +
> +               package_fan1: package-fan1 {
> +                       hysteresis = <2000>;
> +                       temperature = <65000>;
> +                       type = "active";
> +               };
> +       };
> +};
> +
> +/* NVMe */
> +&pcie2x1l1 {
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pcie30x1m1_1_clkreqn &pcie30x1m1_1_waken>;
> +       reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
> +       supports-clkreq;
> +       vpcie3v3-supply = <&vcc3v3_pcie_m2>;
Is this real? In the schematic, the supply looks like vcc_3v3_s3.

> +       status = "okay";
> +};
> +
> +/* NIC */
> +&pcie2x1l2 {
> +       reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
> +       vpcie3v3-supply = <&vcc3v3_pcie20>;
> +       status = "okay";
> +};
> +
> +&pinctrl {
> +       bluetooth {
> +               bt_wake_gpio: bt-wake-pin {
> +                       rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
> +               };
> +
> +               bt_wake_host_irq: bt-wake-host-irq {
> +                       rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_down>;
> +               };
> +       };
> +
> +       usb {
> +               vcc5v0_otg_en: vcc5v0-otg-en {
> +                       rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
> +               };
> +       };
> +
> +       wlan {
> +               wifi_host_wake_irq: wifi-host-wake-irq {
> +                       rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>;
> +               };
> +       };
> +};
> +
> +&pwm15 {
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pwm15m2_pins>;
> +       status = "okay";
> +};
> +
> +&pwm2 {
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pwm2m1_pins>;
> +       status = "okay";
> +};
> +
> +&pwm3 {
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pwm3m2_pins>;
> +       status = "okay";
> +};
> +
> +&sdhci {
> +       status = "okay";
> +};
> +
> +&sdio {
> +       #address-cells = <1>;
> +       #size-cells = <0>;
> +       bus-width = <4>;
> +       cap-sd-highspeed;
> +       cap-sdio-irq;
> +       keep-power-in-suspend;
> +       max-frequency = <150000000>;
> +       mmc-pwrseq = <&sdio_pwrseq>;
> +       no-mmc;
> +       no-sd;
> +       non-removable;
> +       sd-uhs-sdr104;
> +       status = "okay";
> +
> +       ap6256: wifi@1 {
> +               compatible = "brcm,bcm43456-fmac", "brcm,bcm4329-fmac";
> +               reg = <1>;
> +               interrupt-names = "host-wake";
> +               interrupt-parent = <&gpio0>;
> +               interrupts = <RK_PA0 IRQ_TYPE_LEVEL_HIGH>;
> +               pinctrl-names = "default";
> +               pinctrl-0 = <&wifi_host_wake_irq>;
> +       };
> +};
> +
> +&u2phy0_otg {
> +       phy-supply = <&vcc5v0_otg>;
> +};
> +
> +&uart9 {
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&uart9m2_xfer &uart9m2_ctsn &uart9m2_rtsn>;
> +       uart-has-rtscts;
> +       status = "okay";
> +
> +       bluetooth {
> +               compatible = "brcm,bcm4345c5";
> +               clocks = <&hym8563>;
> +               clock-names = "lpo";
> +               device-wakeup-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
> +               interrupt-names = "host-wakeup";
> +               interrupt-parent = <&gpio0>;
> +               interrupts = <RK_PC5 IRQ_TYPE_LEVEL_HIGH>;
> +               max-speed = <1500000>;
> +               pinctrl-names = "default";
> +               pinctrl-0 = <&bt_wake_host_irq &bt_wake_gpio>;
> +               shutdown-gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
> +               vbat-supply = <&vcc_3v3_s3>;
> +               vddio-supply = <&vcc_1v8_s3>;
> +       };
> +};
> +
> +&usb_host0_xhci {
> +       dr_mode = "host";
> +};
> +
> +&usbdp_phy0 {
> +       rockchip,dp-lane-mux = <0 1>;
> +};
> --
> 2.53.0
>